diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Introductions (http://www.diyaudio.com/forums/introductions/)
-   -   Hello From Melbourne Australia (http://www.diyaudio.com/forums/introductions/220881-hello-melbourne-australia.html)

mrtor 3rd October 2012 04:17 AM

Hello From Melbourne Australia
 
Hello Everyone from Melbourne Australia on a lovely sunny day

Just discovered this group through googling for a PREAMP circuit and wow I am blown away by some of the stuff I have read thus far.

I am what most would call at best as a wanna be circuit builder. I have had lots of fun building schematics that I have found into home made PCB's and tinkering from there. No formal training, all self taught.

I don't understand a lot of the design stuff when creating the schematics and working out the technical stuff of gain etc etc but I am keen to learn more.

I play a lot with two way radios and my whole reason about looking for a PREAMP circuit was to help me with a fun little project to link multiple two way radios into a simple desk top console with a headset

I will go scrounging through the miriad of threads here to see if someone has done what I want to do already and hopefully pick up some useful information along the way.

I look forward to being able to contribute something meaningful back to this community

Regards
Mike

mrtor 3rd October 2012 04:23 AM

Hi From Melbourne
 
Hello Everyone

Found this brilliant site while googling for a preamp circuit for the audio from my two way radios.

Looks like I will have a lot to learn here as I am a wanna be circuit designer

I have built up lots of circuits from schematics produced by others, made my own pcb's and come up generally with a working product :-)

I have a great workshop at home full of way too much stuff (just ask my wife) and I look forward to being able to learn lots and hopefully contribute back something meaningful to the community here

Regards
Mike

AJT 3rd October 2012 04:29 AM

:cop: welcome to the forum.......hope your stay here gives you lots of knowledge and experience.....you are under moderation being a newbie so that your first few posts will have to be seen by a moderator for approval.....so be patient and wait a while before putting up another thread....:)

Jonathan Bright 3rd October 2012 04:49 AM

Greetings from Brisbane. Cheers, Jonathan

skippyboy 5th October 2012 12:17 PM

Good to see you, i am a very junior member still learning the ropes, and live in Kincumber.

Moondog55 6th October 2012 02:36 AM

Member from Geelong saying "G'Day"


All times are GMT. The time now is 04:21 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2