Hello from waaaaaay Down Under

MurphyUHF10 · 26th October 2010, 02:10 AM

Hi There,

I'm from Melbourne Australia and have been reading and researching for a long time on here...

It's nice to finally become a member!!

I finally decided to join because I need the circuit diagram on offer for the Behringer A500 as I have some problems with it.. But any reason to join is a good one!!

Cheers..
Murphy

indianajo · 03:00 AM

Welcome, there is a great education here.
For the repair person, you can search the internal files here on the upper right toolbar.
Don't forget for schematics of commercial equipment, outside this site, eserviceinfo.com, is often useful.
I see a lot of nice travel shows on TV from Melbourne and a little north. The nice damp part of Australia.

MurphyUHF10 · 26th October 2010, 05:02 AM

Quote:

Originally Posted by indianajo

Welcome, there is a great education here.
For the repair person, you can search the internal files here on the upper right toolbar.
Don't forget for schematics of commercial equipment, outside this site, eserviceinfo.com, is often useful.
I see a lot of nice travel shows on TV from Melbourne and a little north. The nice damp part of Australia.

Hi, Thanks for the welcome, and the tip about intenral files!!
Yes, Melbourne (and the east coast) is quite damp,, but we're drying up a bit,, only this winter did we get our first good soaking in ages!!

Cheers..

BudP · 26th October 2010, 05:09 AM

Huge number of you wrong way round down the drain characters on this forum. Glad to see yet another!

audi0 · 26th October 2010, 05:11 AM

G'day Murphy and welcome aboard!

Francec · 31st October 2010, 09:59 AM

G'day from another Melbournite.

Frank
3-way active speakers, self-built pre-amp and soon-to-be Linux music server and USB DAC.

Moondog55 · 2nd November 2010, 05:04 AM

WAAAAAAY!!! down south would have meant you had two heads, or a great big scar on your neck, I'm in Geelong so South of you, Welcome!!

Francec · 2nd November 2010, 08:12 AM

"or a great big scar on your neck". As a matter of fact, I do (but I'm originally from WA).

Frank

INM8 · 3rd November 2010, 07:26 AM

Welcome mate. Waaaaaaaaay down south?! Hardly. Try Tasmania :-D

MurphyUHF10 · 3rd November 2010, 09:18 AM

Quote:

Originally Posted by INM8

Welcome mate. Waaaaaaaaay down south?! Hardly. Try Tasmania :-D

Thanks for the welcome!!

Particularly from all the Aussies :-)

Yes, I suppose you guys are "more south" than me.. I said that because I thought this forum was mainly Europeans and Americans... But I can see all the Aussies coming out of the wood work!!

Cheers, and thanks..

Murphy..

26th October 2010, 02:10 AM	#1
MurphyUHF10 diyAudio Member Join Date: Oct 2010 Location: Melbourne	Hello from waaaaaay Down Under Hi There, I'm from Melbourne Australia and have been reading and researching for a long time on here... It's nice to finally become a member!! I finally decided to join because I need the circuit diagram on offer for the Behringer A500 as I have some problems with it.. But any reason to join is a good one!! Cheers.. Murphy

26th October 2010, 02:58 AM	#2
indianajo diyAudio Member Join Date: Jan 2010 Location: Jeffersonville, Indiana USA	Welcome Welcome, there is a great education here. For the repair person, you can search the internal files here on the upper right toolbar. Don't forget for schematics of commercial equipment, outside this site, eserviceinfo.com, is often useful. I see a lot of nice travel shows on TV from Melbourne and a little north. The nice damp part of Australia. __________________ Dynakit ST70, ST120, PAS2,Hammond H182(2 ea),H112,A100,10-82TC,Peavey CS800S,SP2-XT's, T-300 HF Projs, Steinway console, Herald RA88a mixer, Wurlitzer 4500 Last edited by indianajo; 26th October 2010 at 03:00 AM.

26th October 2010, 05:09 AM	#4
BudP diyAudio Member Join Date: Feb 2007 Location: upper left crust, united snakes	Huge number of you wrong way round down the drain characters on this forum. Glad to see yet another! __________________ "You and I and every other thing are a dependent arising, empty of any inherent reality" Tsong Ko Pa

2nd November 2010, 05:04 AM	#7
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	WAAAAAAY!!! down south would have meant you had two heads, or a great big scar on your neck, I'm in Geelong so South of you, Welcome!! __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th October 2010, 05:11 AM	#5
audi0 diyAudio Member Join Date: May 2009 Location: 37.34 degrees South Blog Entries: 5	G'day Murphy and welcome aboard!

31st October 2010, 09:59 AM	#6
Francec Banned Join Date: Jul 2006 Location: Port Melbourne, Australia	G'day from another Melbournite. Frank 3-way active speakers, self-built pre-amp and soon-to-be Linux music server and USB DAC.

2nd November 2010, 08:12 AM	#8
Francec Banned Join Date: Jul 2006 Location: Port Melbourne, Australia	"or a great big scar on your neck". As a matter of fact, I do (but I'm originally from WA). Frank

3rd November 2010, 07:26 AM	#9
INM8 diyAudio Member Join Date: Jan 2007	Welcome mate. Waaaaaaaaay down south?! Hardly. Try Tasmania :-D

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read