diyAudio (
-   Introductions (
-   -   Hi, new oldie (

step77 15th November 2009 01:52 AM

Hi, new oldie
Haven't posted much as i tend to get online the end of the working day. i have a Marantz CD63 modified by a Marantz engineer with Tentlabs 3 or 4 clock and black gates etc and other bits and pieces. It does sound wonderful but it has no on/off. I don't like the power supply so how can I do the removal of the cable and fit an IEC. I don't really want to cut bits if I don't have to. Any ideas? I can supply a decent digital image as electronics isn't my strong point.

planet10 15th November 2009 04:51 AM

To do a proper job you are going to have to make a hole on the back to fit the IEC.


step77 16th November 2009 12:25 AM

Hi, thanks. I was just being hopeful. what's the best tool I could use to cut teh hole?


planet10 16th November 2009 03:18 AM

There is actually a recent thread here on this subject...


step77 16th November 2009 10:31 PM

Found thread
Hi, thanks. Found the thread and it's what I needed. Sorry to have not looked myself. Can't afford the Fien but the Bosch 180e looks good and it's only 60 quid on Amazon. Now I only need a good IEC but that's another job :)

anthonyso 17th November 2009 12:34 PM

Hi guys,
This is Anthony from New York. I am newbie here actually I like this site so, I just take this chance to introduce my self and I hope you'll welcome me here. It's my pleasure to join with you in this community and I hope I'll learn something new from you here.


All times are GMT. The time now is 01:50 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio