Greetings from Malaysia

sunny130y · 25th April 2003, 01:32 AM

Hi everyone,

I have been an audiophile for about 10yrs now. After seeing some awesome looking DIY gears on the net, especially those Pass Alephs, I am convinced that I could probably get better value for $ and satisfaction from DIY.

My current system:
Marantz cd63KI sig - reclocked & substituted op amp
Densen B100 integrated
Sonus Faber Concertino speakers
MIT Terminator 4 speaker cables
& various DIY mains cable

Latest project - NSS Final Electrostatic hybrid from Audiocircuit

Next project - P3A? AKSA?

Since I lack a technical background, I have got lots to learn. Look forward to your support

paulb · 25th April 2003, 05:37 AM

Hi there. Have fun here!

pinkmouse · 25th April 2003, 10:36 AM

Hi Sunny and welcome to diyAudio

Many people on the forums have built AKSAs and P3As, so I'm sure there will be no shortage of help should you need it!

planet10 · 26th April 2003, 08:18 AM

Welcome Sunny,

Quote:

Originally posted by pinkmouse
Many people on the forums have built AKSAs

I was just looking at my unbuilt AKSA the other day... too much work, not enuff time for play

dave

sunny130y · 26th April 2003, 09:56 AM

Thanks for your warm welcome. I have collected some information on P3A, AKSA and the Gainclone, and am making plans. Just spent a fortune on my NSS Final 0.3 ESLs and need to save some $

.

nanhifi · 26th April 2003, 04:17 PM

I just think if i the only one malaysian DIY ,. Nice to meet you all. I have try the blameless amp anybody??

sunny130y · 28th April 2003, 12:59 AM

Hi Nan,

As far as I know there are a few others as well, ie. Hazard, Bawang and Tone_e. As you know DIY community in Malaysia is very small. With countless of cheap Chinese imports, most people do not care about DIY electronics. I have been trying to gather local sources (Malaysia, especially in KL) for parts like aluminium casing and heatsinks and was fortunate enough to have guidance from Hazard. We should share our experience. Hazard has been very helpful to me so far

.

I need a good 100wpc amp with good voltage supply for my ESL and am deliberating on P3A or Pass Aleph 2. Any idea where I can get good (and cheap) aluminium casing?

25th April 2003, 01:32 AM	#1
sunny130y diyAudio Member Join Date: Apr 2003 Location: Kuala Lumpur	Greetings from Malaysia Hi everyone, I have been an audiophile for about 10yrs now. After seeing some awesome looking DIY gears on the net, especially those Pass Alephs, I am convinced that I could probably get better value for $ and satisfaction from DIY. My current system: Marantz cd63KI sig - reclocked & substituted op amp Densen B100 integrated Sonus Faber Concertino speakers MIT Terminator 4 speaker cables & various DIY mains cable Latest project - NSS Final Electrostatic hybrid from Audiocircuit Next project - P3A? AKSA? Since I lack a technical background, I have got lots to learn. Look forward to your support

25th April 2003, 10:36 AM	#3
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Hi Sunny and welcome to diyAudio Many people on the forums have built AKSAs and P3As, so I'm sure there will be no shortage of help should you need it! __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

26th April 2003, 09:56 AM	#5
sunny130y diyAudio Member Join Date: Apr 2003 Location: Kuala Lumpur	Thanks for your warm welcome. I have collected some information on P3A, AKSA and the Gainclone, and am making plans. Just spent a fortune on my NSS Final 0.3 ESLs and need to save some $.

26th April 2003, 04:17 PM	#6
nanhifi diyAudio Member Join Date: Apr 2003 Location: malaysia	nice to meet your all I just think if i the only one malaysian DIY ,. Nice to meet you all. I have try the blameless amp anybody?? __________________ malaysian

28th April 2003, 12:59 AM	#7
sunny130y diyAudio Member Join Date: Apr 2003 Location: Kuala Lumpur	Malaysian DIY Hi Nan, As far as I know there are a few others as well, ie. Hazard, Bawang and Tone_e. As you know DIY community in Malaysia is very small. With countless of cheap Chinese imports, most people do not care about DIY electronics. I have been trying to gather local sources (Malaysia, especially in KL) for parts like aluminium casing and heatsinks and was fortunate enough to have guidance from Hazard. We should share our experience. Hazard has been very helpful to me so far . I need a good 100wpc amp with good voltage supply for my ESL and am deliberating on P3A or Pass Aleph 2. Any idea where I can get good (and cheap) aluminium casing?


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th April 2003, 05:37 AM	#2
paulb diyAudio Member Join Date: Jun 2001 Location: Calgary	Hi there. Have fun here!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greetings from Malaysia!	khairil	Introductions	2	6th July 2009 03:52 PM
Hi, I am Hoy from Malaysia	hoyhoysum	Introductions	2	23rd October 2008 04:10 PM
from Malaysia	yustech	Introductions	2	23rd June 2008 04:44 PM
Hello from Malaysia	marsupial	Introductions	11	27th June 2007 07:15 AM
Big Hello from Malaysia	safetyman	Introductions	2	27th January 2004 02:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read