Hi all, comblete diy noob Hi all, comblete diy noob - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Introductions Welcome to the DIYaudio Community. Introduce yourself here so we can get to know you better!

Hi all, comblete diy noob
Hi all, comblete diy noob
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st December 2007, 07:07 AM   #1
m54 is offline m54  United States
diyAudio Member
Join Date: Dec 2007
Default Hi all, comblete diy noob

Hello to everyone!

i am completely new to most DIY type stuff

i have no knowledge in building electronics, but i want to try my hand at making an amplifier from a kit. 41hz.com has some that seem simple. (amp 6 is what im looking at)

what i want to know is, what should i do before i attempt to anything like this? any help will be greatly appreciated.
  Reply With Quote
Old 1st December 2007, 01:25 PM   #2
c2cthomas is offline c2cthomas  United States
diyAudio Member
c2cthomas's Avatar
Join Date: Oct 2006
Location: Near "Music City" (Nashville Tennessee)
Hi m54,
No knowledge in building electronics - well that will make things a bit of a challenge - but we all started somewhere!! 1st off - in order to build electronics kits you will need to get a soldering station (or soldering iron) and learn how to solder. 2nd thing - when you are putting together amplifiers somewhere in the instructions you are going to be told to set the "bias voltage" for the amp and that is going to involve the use of a voltage meter (available for cheap at local Radio Shack or online at Parts Express, etc.). Now things are going to get interesting because you are going to start to learn the basics of electronics - just the most basic of things to start - like how to measure voltage. Soon you will find yourself going nuts reading stuff and buying equipment - only to be followed by more reading and more buying!! To support your craving for even better (eventually "the best") equipment you will need to get a good paying job and then spend your spare time designing and prototyping! Eventually you will find yourself alone, isolated and broke - BUT you will have a real kick a** stereo!!! GET OUT NOW BEFORE IT'S TO LATE!!!

Orrrrrrrrr - take a look at:
http://www.bcae1.com/ Really good info - wish I had access to something like this when I started out!!
http://www.lalena.com/Audio/ another good site for newbie's
http://www.lampizator.eu/ note: use of this site is restricted until you have spent 20 years screwing around in audio and are finally ready to get down to the business of doing things right. You will miss out on many years of learning the hard way, making mistakes, spending to much money, and winding up bitter and alone.

If I haven't managed to scare you off running to your nearest "big box" stereo store to buy a pre-packaged all - in - one "system" by now then I'm afraid that you may have been infected by the audio nut bug. In that case - Welcome to the forum!!
DIY audio can be expensive but getting to see things go up in smoke - that's priceless!!!! ..... "whatever - call it brainfart of Mighty ZM"
  Reply With Quote
Old 1st December 2007, 05:27 PM   #3
Cal Weldon is offline Cal Weldon  Canada
diyAudio Moderator
Cal Weldon's Avatar
Join Date: Jan 2004
Location: Near Vancouver
Hi all, comblete diy noob
Hi and welcome to the forums.
planet10 needs your help:
Let's help Ruth and Dave
  Reply With Quote
Old 1st December 2007, 11:07 PM   #4
Renron is offline Renron  United States
diyAudio Member
Renron's Avatar
Join Date: Jan 2007
Location: Sacramento
Hello "M", (in Bonds best voice)
Welcome to the nut farm!!!!!!!
I'm about 4 months ahead of you and my wife thinks I'm crazy....always reading DIYAudio.com stuff. The more you read the better questions you will have to ask!
Buy a couple of books on basic electronics. I bought a bunch. Some are Junk and Most are hard for us Newbs to grasp. So far I like: in no certain order...

Practical electronics ( a self teaching guide) by Morrison
Valve amplifiers and Building Valve Amplifers by Morgan Jones (only if interested in Tubes and glowing heaters )

Getting Started In Electronics by Forrest Mims III (if you can get past the format...like a college rule notebook) good buy anyway.

Read the stickies from the MODS. they are there for a reason.

MOstlLY Be CaReFulL with high and mains voltages.

Don't be afraid to ask questions, but use the search enging first.
"If it doesn't work properly, hope it catches on fire"- Nelson Pass @ BA3
"I fired up the prototype. Literally." The Prophet Pass.
  Reply With Quote


Hi all, comblete diy noobHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help a noob fix a ZV9 neil_kaye Pass Labs 46 2nd January 2009 06:56 PM
Old Noob Drew2 Introductions 3 23rd December 2008 05:34 AM
Another noob TWS Introductions 2 9th January 2008 03:16 PM
Help a noob out.... mtrout Introductions 2 21st March 2007 07:56 AM

New To Site? Need Help?

All times are GMT. The time now is 12:47 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio