Trace Elliot & Alesis problems on the same amplifier!!!

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
A friend of mine brought to me the TA-200 Trace Elliot amplifier for acoustic instruments complaining the reverb was not there!
I looked at it from the inside and saw that some components were almost melting...
I managed to read the components' values but only one component is really melted and no value can be read...
It can be either a plastic cap or a diode but I really don't know...
I contacted Trace Elliot and they send me the schematics except of the Reverb pcb which is an Alesis board and they own the schematics.
I contacted Alesis many times but I never got a reply. I think that due to age of the board they really don't want to deal with it...
So I'm begging if anyone owns an amplifier like this one and can check the component values on the reverb pcb board I'd be more than grateful!!! Of course if someone owns the schematics...

PLEASE SEND IT TO ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Alesis board : SP-16, Rev. E, 10-22-90
located in a Trace Elliot amplifier, model: TA-200

Looking for 25, 26 & 27 component values...

25 can not be read at all!!!

26 & 27 are plastic 100nF, just want to make sure I read it right...
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.