Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

Guitar amp input tube paralleled
Guitar amp input tube paralleled
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th July 2006, 07:23 PM   #1
voivodata is offline voivodata  United States
diyAudio Member
Join Date: Apr 2006
Location: Utica
Default Guitar amp input tube paralleled

Hi all

Has anybody tried using a paralleled ECC 83 (jumped pins 1 to 6, 2 to 7, and 3 to 8) as input stage of a guitar amp? I found a related thread( http://www.diyaudio.com/forums/showt...584&highlight= ), but it’s not guitar amp oriented and is a bit too tech for me? Would paralleling increase sensitivity, signal to noise ratio, warmth, and other such nice things. Is it worth trying for a guitar amp input stage?

Also, I noticed that most tube effects loop circuits use two gain stages, a “buffer” which lowers the signal level and then a recovery stage. What will happen if I use a resistor network (or a pot) to lower the signal level instead of the buffer? Will this work?

The reason I’m asking is because after modifying the preamp sections of a guitar amp (fender tremolux clone), I ended with half of the first ECC83 and half of the third ECC83 being unused, so wonder if I should parallel the first half with the input stage and use the other half for an effects loop recovery stage.

  Reply With Quote
Old 7th July 2006, 03:51 AM   #2
gingertube is offline gingertube  Australia
diyAudio Member
Join Date: Oct 2004
Location: Adelaide South Oz
Paralleling the input stage works well
You get 2 x the gain
1/ root 2 the noise.

You need to reduce anode load resistor to half and cathode bias resistor to half - you might also need to reduce grid stop resistor (probably 68K) to half.

You can also play with harmonic structures by using separate (original value) cathode resistor on each half (rather than connecting cathodes together) and bypassing one side with say 22uF and the other with say 0.47uF. Or even different value cathode resistors to run the 2 halves at different operating points.

Play to your hearts content.

  Reply With Quote
Old 8th July 2006, 01:03 PM   #3
voivodata is offline voivodata  United States
diyAudio Member
Join Date: Apr 2006
Location: Utica
Thanks gingertube,

I paralleled the input tube and ....wow......just AUSOME, especially the OD channel - much quieter now. At lower gain settings the sound became creamier and thicker. At higher gain, I get full out skull-crushing shred that is still very quiet......just amazing

This is a great mod that I would recommend to anybody messing around with DIY guitar amps. I wonder how come parallening the input tube is not more widely used in commercial amps. As far as I know Matchless are the only amps that have it. Certainly my next project will involve using paralleled ECC83 in all preamp stages.

Does anybody have any thoughts about my effects loop question?


PS forgot to mention that I left the anode, cathode, and grid resistors as they were ...220k, 1k5, 68k. Cathode bypass cap is 680n
  Reply With Quote
Old 8th July 2006, 07:11 PM   #4
amperex is offline amperex  United States
diyAudio Member
Join Date: Feb 2005
Location: MI
Default Matchless

I believe some Matchless models do the parallel tube trick.
  Reply With Quote


Guitar amp input tube paralleledHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1 Input/2outputs Guitar Amp Switch hughes123 Instruments and Amps 1 6th July 2009 04:45 PM
Transformer input for guitar mashaffer Instruments and Amps 7 9th January 2008 12:11 AM
converting PA head to 1/4' guitar input tonemonster Instruments and Amps 10 11th July 2006 06:25 PM
Mic input for guitar? Burnedfingers Instruments and Amps 1 21st May 2004 12:33 PM
guitar amp input jack help BelieveInKarma Instruments and Amps 16 30th December 2003 05:44 PM

New To Site? Need Help?

All times are GMT. The time now is 04:52 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio