converting am radio to guitar amp

[intensate]

Hello all
I am going to use this as a guitar amp,I am using only valve 3 and 4 . From the schematic can anyone suggest tweeks to it for guitar use like feed back or over drive etc or tone stacks
I Have made a mains supply for it,I have 68vdc on ht and 1.29 on heaters
thanks

 

[glaznost45]

I cannot open the PDF perhaps you can list the Valve line up and repost the schematic as a jpg.

 

[intensate]

thanks for that ,just done a jpeg

 

[Printer2]

Here is the valve lineup.

Right hand side of table I and II.
https://www.vintage-radio.info/download.php?id=745
http://www.r-type.org/pdfs/daf96.pdf
http://www.r-type.org/pdfs/dl96-1.pdf
http://www.r-type.org/pdfs/df96.pdf
http://www.r-type.org/pdfs/dk96.pdf

 

[PRR]

.

 

[Printer2]

No capacitor needed on the nasty input?

 

[JMFahey]

No.

 

[intensate]

convert class d wavemeter to something useful like guitar amp

Hi all is there anything this could be converted to or will I need to change complete circuit and parts



thanks all

 

[intensate]

thanks all am going to use that schematic and add the nasty input

 

[Printer2]

I am guessing you could reuse the tube socket.

 

[Sonce]

Triode can supply only 3.3 mA max, so you can not build a guitar amplifier.