From the manual:
Type electret condenser, omni-directional
Impedance 600 Ohms
Sensitivity -60 dB
Frequency response 15 Hz to 20 kHz
Connector gold-plated XLR
Phantom power +15 V to +48 V
Weight app. 120 g
From the DEQ2496 manual states:
ECM8000 Input sensitivity: -37dBv/Pa
but this figure is not presented in the mic manual, strange !
/j
Let us know what you do: I'm also interested in a good, low noise micamp for
measurements !
/j
Type electret condenser, omni-directional
Impedance 600 Ohms
Sensitivity -60 dB
Frequency response 15 Hz to 20 kHz
Connector gold-plated XLR
Phantom power +15 V to +48 V
Weight app. 120 g
From the DEQ2496 manual states:
ECM8000 Input sensitivity: -37dBv/Pa
but this figure is not presented in the mic manual, strange !
/j
Let us know what you do: I'm also interested in a good, low noise micamp for
measurements !
/j
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.