Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

6v6 Pushpull  question
6v6 Pushpull  question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 14th May 2013, 07:58 AM   #1
phil is offline phil
diyAudio Member
Join Date: May 2001
Default 6v6 Pushpull question

Ok, I have just completed my amp and I'm in the process of testing. The power supply called for a 5H choke of 137 Ohms, the choke I had on hand is a 5H but the resistance is only 105 Ohms. I used an Electroprint output transformer that was left over from another project. During my tests I noticed that the screen voltages on the 6v6's is higher than the plate voltage, this I put down to the winding resistance of the output transformer primaries being greater than the chokes resistance.
Need I worrying about this or will this condition change once I use the amp under load. I have not fed a signal into the amp yet.
Hope you can make sense of my question. Thanks.
  Reply With Quote
Old 14th May 2013, 09:50 AM   #2
DF96 is offline DF96  England
diyAudio Member
Join Date: May 2007
No problem. When working with valves assume a 10-20% tolerance on everything.
  Reply With Quote


6v6 Pushpull  questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bell 2420 tube amplifier. Bias question. 6v6 push pull The Donk! Tubes / Valves 5 30th May 2013 09:40 AM
6V6 amp question cbassss Tubes / Valves 5 18th September 2012 08:22 AM
6V6/12AX7 Project Question/Help Skitch72 Tubes / Valves 4 27th February 2011 09:25 PM
6v6 PP biasing question mor2bz Tubes / Valves 1 24th November 2010 06:46 PM
Power Transformer for 6V6 SE Amp Question zxx123 Tubes / Valves 3 25th January 2008 02:06 PM

New To Site? Need Help?

All times are GMT. The time now is 02:11 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio