Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

ElectroTone OrganMate spring reverb - mod suggestions?
ElectroTone OrganMate spring reverb - mod suggestions?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th February 2013, 06:24 AM   #1
fyzygy is offline fyzygy
diyAudio Member
 
Join Date: Jul 2010
Default ElectroTone OrganMate spring reverb - mod suggestions?

This thing is designed to be connected *in series* with tube organs, requiring an input signal of between 0.4 and 2.0 volts at the organ's softest stop/setting. It works okay with line levels too, although the reverb effect is subtle and the signal-to-noise ratio appalling (lots of high-frequency hash that can be decimated with a shunt capacitor at output - but that's far from an ideal solution). I am happy to run this thing exclusively tube, at higher signal voltages, but would like to make it more compatible with modern equipment (specifically, to use it as a channel insert or ideally, send/return on a mixing desk).

Please refer attached schematic when considering the following:

1. Would replacing the 12AU7 driver stage with a 12AX7 help drive the springs harder with a more modest input signal?

2. Is there a straightforward way to have this circuit wired fully "wet" - to use with send/return? I don't quite understand the trimmer pot's function - I don't think it's a wet/dry mix as I first assumed. Would simply breaking the "bypass" leg of the circuit at input jack do the trick?

3. I considered replacing the coupling caps (ceramic throughout signal path) with audio types; any suggestions on this? I figured that spring reverb is desired for coloration rather than transparency, so have left the ceramics intact, at least for now.

4. Any other tweaks advisable?

Any ideas, insights or suggestions would be very much appreciated!
Attached Images
File Type: gif Organmate2.gif (52.9 KB, 39 views)
  Reply With Quote
Old 12th February 2013, 09:55 AM   #2
Kay Pirinha is offline Kay Pirinha  Germany
diyAudio Member
 
Join Date: Oct 2011
Location: Somewhere in Germany
Quote:
Originally Posted by fyzygy View Post
1. Would replacing the 12AU7 driver stage with a 12AX7 help drive the springs harder with a more modest input signal?
No. A 12AX7 triode won't be powerful enough as a reverberation tank driver. But you could consider a 12DW7/7247/ECC832 tube, which is half a 12AX7 and half a 12AU7 in one envelope, with the 12AU7 half driving the tank.

Quote:
Originally Posted by fyzygy View Post
2. Is there a straightforward way to have this circuit wired fully "wet" - to use with send/return? I don't quite understand the trimmer pot's function - I don't think it's a wet/dry mix as I first assumed. Would simply breaking the "bypass" leg of the circuit at input jack do the trick?
This circuitry indeed is mentioned as an insert into a Send/Return FX loop. Just connect Send to Input an return to Output. The pot named R20 sets the amplification factor of the regeneration amplifier.[/qoute]

Quote:
Originally Posted by fyzygy View Post
3. I considered replacing the coupling caps (ceramic throughout signal path) with audio types; any suggestions on this? I figured that spring reverb is desired for coloration rather than transparency, so have left the ceramics intact, at least for now.
You'd better leave all capacitors in their original state. Remember, it's just an FX device with no high end ambitions.

Quote:
Originally Posted by fyzygy View Post
4. Any other tweaks advisable?
Sorry, no clues. But you could google for Fisher Space Expander, a similar, but more sophisticated design.

Btw, wrong branch within this board?!?

Best regards!
  Reply With Quote

Reply


ElectroTone OrganMate spring reverb - mod suggestions?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Spring Reverb driver mod. required magnetman Instruments and Amps 1 16th October 2011 10:35 AM
building spring reverb Redfoxfur Instruments and Amps 26 24th June 2009 04:07 AM
Spring Reverb Units TGRANT Instruments and Amps 11 4th March 2009 11:31 PM
Spring Reverb transformer ThSpeakerDude88 Instruments and Amps 6 18th April 2007 03:17 AM
Transducers for a spring reverb seilee Instruments and Amps 3 5th December 2006 02:56 PM


New To Site? Need Help?

All times are GMT. The time now is 07:45 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki