Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

Bass preamp: non-inverting an inverting tone stack (opamp)
Bass preamp: non-inverting an inverting tone stack (opamp)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th January 2013, 12:03 AM   #11
JonSnell Electronic is offline JonSnell Electronic  United Kingdom
diyAudio Member
JonSnell Electronic's Avatar
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
Hi, if you use an LF353 I don't see a problem. It has a Jug Fet input, so very high impedance, most preamps are 50K and this one is several Meg Ohms.
Take your 10K to ground and 470K from pin 3 to ground and then feed your signal in through a 100n Cap and a 10K resistor in series.
I think you will find that will do more than you hoped for.
  Reply With Quote
Old 6th January 2013, 12:20 AM   #12
JMFahey is offline JMFahey  Argentina
diyAudio Member
JMFahey's Avatar
Join Date: Mar 2009
Location: Buenos Aires - Argentina
Search for a bass pream specific schematic.
The one in the datasheet is fine ... for a Hi Fi preamp, with +/-15V rails, driven from a low impedance, etc.
You need high input impedance to properly load your pickups (the 470K suggested above instead of 10 K is fine) and running out of a 9V battery is more practical in that situation.
  Reply With Quote
Old 9th January 2013, 05:09 PM   #13
Loudthud is offline Loudthud  United States
diyAudio Member
Loudthud's Avatar
Join Date: Nov 2007
Location: Near Dallas Texas USA
Here is a link to a nice bass preamp built around the 3 band Baxandall EQ. It uses JFETs but it will get you started. Link: http://www.albertkreuzer.com/pics/el...eamp_sch21.gif
  Reply With Quote
Old 9th January 2013, 08:03 PM   #14
Fredde79 is offline Fredde79  Finland
diyAudio Member
Join Date: Oct 2010
Location: Helsinki, Finland
Thanks guys! Everything works as it should now!
  Reply With Quote


Bass preamp: non-inverting an inverting tone stack (opamp)Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
sonic differences between inverting/non-inverting LM4780 VS both non-inverting LM4780 jarthel Chip Amps 5 19th July 2007 01:37 PM
whats the difference between inverting and no inverting mikee55 Parts 1 7th January 2007 11:36 PM
inverting / non-inverting op-amp circuits Learnincurve Solid State 11 21st January 2005 06:40 PM
Bridged/Stereo, w or w/o servo, inverting 3886, inverting buffer PCB Alexander Rice Chip Amps 9 27th March 2004 07:53 PM
Inverting/non-inverting Op-amp Inputs !!!help!!! IIR Solid State 17 11th May 2002 03:02 AM

New To Site? Need Help?

All times are GMT. The time now is 09:17 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio