Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

odd-ball PI circuit identification, and headroom question
odd-ball PI circuit identification, and headroom question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th June 2012, 09:47 PM   #1
brilliantblue is offline brilliantblue  United States
diyAudio Member
Join Date: Jan 2011
Location: Columbia, MO
Default odd-ball PI circuit identification, and headroom question

Hey there! I also posted this in Tubes/Valves as the amp started out non-instrument:

Going in the guitar amp direction with this one -

This schematic is modified from an old Bell & Howell projector amp for model 302 - PP 6v6's with a 12AU7 PI. Can anyone identify the PI circuit? It appears closest to "floating paraphase" to me.

My only complaint with this circuit is that I'd like more clean headroom/volume. Driving it with a guitar, I'm getting clipping at about 1/3 of the way up on the volume.

The clipping/distortion itself is pretty musical to me - that keeps me from switching to LTP or some other type of PI. But I'm looking to get a more "drummer friendly" volume from the amp without being slaved to a ton of crunch - idealy I would have a workable "clean" volume and then hit a boost pedal to push it into saturation.

I don't have all the specs of actual voltages and such to provide, but I did send a sine wave at 1v rms through the amp and found that the PI is distorting well before any Preamp stages - I don't even know that the preamp reaches saturation/clipping.

Basically, I really love to tone of this amp, but want more range of use and volume.

What can I change in the PI circuit to get more or to reduce clipping?

Thanks for any input!
Attached Images
File Type: gif 9431-pi-output.gif (53.4 KB, 23 views)
  Reply With Quote


odd-ball PI circuit identification, and headroom questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Odd-ball PI circuit identification request, and headroom question brilliantblue Tubes / Valves 39 5th July 2012 05:14 AM
Another odd-ball PA amplifier lazzer408 Instruments and Amps 11 13th March 2011 02:38 PM
Marshall JCM 800 50W PI circuit famousmockingbird Instruments and Amps 4 8th March 2011 02:57 AM
Stupid Question- How To Use Ball Bearings? lgreen Parts 32 20th December 2003 04:58 AM
Preamp PI-filter circuit Serow Solid State 0 18th February 2002 06:57 AM

New To Site? Need Help?

All times are GMT. The time now is 05:41 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio