I have an EP1500 with a strange problem. I'm pretty new to fixing amps, just replaced a shorted output transistor in an old hifonics falcon amp and thought I'd look into this Europower now. I'm using this on my home theatre system pushing 2 12" JL Audio subs, channel 2 comes in right away when I power it on, channel 1 won't come in unless I crank up the volume on my reciever to the point I'm almost clipping channel 2, then channel 1 will come in and sounds good after that. It will stay working if I turn it back down also, just won't come on until I give it a lot of volume. Anyone had a problem like this with these amps?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.