Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

troubleshooting Harvard amp
troubleshooting Harvard amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th March 2009, 05:26 PM   #1
fluffhead is offline fluffhead  United States
diyAudio Member
Join Date: Feb 2009
Default troubleshooting Harvard amp

Hi, I have an old Harvard Reverb (~1980 - one of the first solid state amps by fender, a little practice amp) and it is having some troubles. I am looking for a little troubleshooting help.

It plays great for 30-40 min (depending on volume and effects going into it) but then it gets really distorted for a little while and eventually dies. It is then out of commission for an hour or so.

The three options I can think of are:
1) transistor is overheating
2) transistor is fried and needs replaced
3) caps are too old and need to be replaced

Any suggestions on where to start or how to determine which on of these is my problem? I am handy with a soldering iron but don't want to replace parts that are ok.

Thanks for the help!
  Reply With Quote
Old 9th March 2009, 06:19 PM   #2
VictoriaGuy is offline VictoriaGuy  Canada
diyAudio Member
Join Date: Dec 2008
Location: Victoria, BC
troubleshooting Harvard amp
I'm not that familiar with solid-state amps (I have a tube Harvard), but another possibility is that a so-called 'cold solder joint' has developed on the circuit board over time. As the amp heats up, things move a bit and the contact becomes intermittent.

You can get spray cans of 'Cold Spray' for troubleshooting such problems. On a simple board like the Harvard, it might be as quick to re-solder the board. It just takes a quick touch with the iron to each joint, usually.

  Reply With Quote
Old 9th March 2009, 06:36 PM   #3
fluffhead is offline fluffhead  United States
diyAudio Member
Join Date: Feb 2009
good idea, I'll give this a shot tonight
  Reply With Quote


troubleshooting Harvard ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Harvard Model 1000 2 way spakers(very old) caveman24 Multi-Way 3 28th August 2010 07:13 AM
need help troubleshooting an amp emremeydan Solid State 12 28th January 2008 10:16 PM
Need help troubleshooting an amp cobra050 Solid State 1 6th June 2004 10:13 PM
help troubleshooting this diy pre-amp zobsky Tubes / Valves 21 2nd November 2003 11:06 PM
Troubleshooting MikeBike Solid State 3 30th September 2001 04:19 PM

New To Site? Need Help?

All times are GMT. The time now is 03:26 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio