Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

how to make a low noise guitar preamp?
how to make a low noise guitar preamp?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th January 2009, 08:01 AM   #1
winner is offline winner  India
diyAudio Member
 
Join Date: Jan 2009
Default how to make a low noise guitar preamp?

i made a guitar preamp using op amp tl074 with 1 mega ohm
impedance and voltage gain of 100 . but its too noisy and
also lot of hum? will using a voltage reg like 7812 help or
is it .coz of the opamp quality?
  Reply With Quote
Old 8th January 2009, 10:37 AM   #2
Nigel Goodwin is offline Nigel Goodwin  England
diyAudio Member
 
Join Date: Jul 2005
Location: North Derbyshire
I suggest you try posting the circuit for what you've built, but it sounds like it's your constructiion that's the problem (hum is usually poor construction).

Why did you use a quad opamp?.
__________________
Nigel Goodwin
  Reply With Quote
Old 8th January 2009, 02:54 PM   #3
Kramerguy is offline Kramerguy  United States
diyAudio Member
 
Join Date: Dec 2008
Default Re: how to make a low noise guitar preamp?

Ferrit beads on the power supply regulator legs always seems to help the automotive stuff I build. You would not belive how electrical noisy engines are.

Quote:
Originally posted by winner
i made a guitar preamp using op amp tl074 with 1 mega ohm
impedance and voltage gain of 100 . but its too noisy and
also lot of hum? will using a voltage reg like 7812 help or
is it .coz of the opamp quality?
  Reply With Quote
Old 8th January 2009, 05:12 PM   #4
Iain McNeill is offline Iain McNeill  United Kingdom
diyAudio Moderator Emeritus
 
Iain McNeill's Avatar
 
Join Date: Oct 2007
Location: Santa Cruz, California
Guitar pickup pre-amps are tricky because they are so high impedance. I would have thought you'd have to go to a discrete JFET input to keep the noise down.

The 20KHz bandwidth thermal noise in a 100Kohm resistance is 5.8uV or 41nV/rt.Hz. The TL074 has a 1KHz noise figure of 18nV/rt.Hz which rises to more like 25nV/rt.Hz at 100Hz. Add a gain of 100 and the noise is getting pretty high.

The mains hum is due to leakage currents flowing in the high impedance input. A regulator won't help I'm afraid. Attention to grounding and use of shielded cable is the key.

Can you post the schematic? It's hard to guess exactly what the problem is.
  Reply With Quote
Old 8th January 2009, 07:07 PM   #5
c2cthomas is offline c2cthomas  United States
diyAudio Member
 
c2cthomas's Avatar
 
Join Date: Oct 2006
Location: Near "Music City" (Nashville Tennessee)
Hi winner - try this site for some tips.
http://www.geofex.com/tubeampfaq/tube_amp.htm
__________________
DIY audio can be expensive but getting to see things go up in smoke - that's priceless!!!! ..... "whatever - call it brainfart of Mighty ZM"
  Reply With Quote

Reply


how to make a low noise guitar preamp?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to make guitar effects processors? winner Instruments and Amps 1 24th March 2009 07:08 PM
Make bass guitar compatable with sub amp? silentblackhat Instruments and Amps 2 28th March 2006 08:39 AM
noise after fixing guitar amp? rumpelstiltskin Instruments and Amps 4 26th April 2005 10:13 AM
Looking to make Guitar cables kimbahpnam Everything Else 0 6th November 2004 09:25 PM
howto make guitar amp cR00z Chip Amps 6 22nd May 2003 05:39 PM


New To Site? Need Help?

All times are GMT. The time now is 09:54 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki