Help With Peavey Bass Cab - Page 2 - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th November 2005, 03:28 AM   #11
Variac is offline Variac  United States
diyAudio Editor
 
Variac's Avatar
 
Join Date: Dec 2001
Location: San Francisco, USA
Well, the drivers are all in parallel. I would have expected two of them to be in parallel, and then those in series, or similar...The the impedence of all of them togehter is the same as one driver.

Does it say something like 8 Ohms or 4 ohms stamped somewhere on the magnet or frame on the drivers?(that's the iimpedence.)
If they are 8 ohm drivers the load on the amp is 2 ohms-pretty darned low.
If they are 4 ohm speakers then it is a load of one ohm reallly low...

BUT they still should move the same amount.

I also wonder if both input jacks really are are wired the same and as you show....

Anyway I'll wait for other's input, and if no one has a better idea I'll try to make a drawing on how I suspect they want to be hooked up.

EDIT:
I note in an earlier post that you said they were in parallel, and they are. Also 16 ohm speakers in parallel would end up as 4 ohms- that might be OK...Any reason you think they are 16 ohm?

MAybe you should try switching the 2 non-moving much drivers with the moving ones (electrically by just moving the wires is OK)- then see if the non moving start moving and the moving stop moving as much.
  Reply With Quote
Old 6th November 2005, 09:02 PM   #12
diyAudio Member
 
Join Date: Nov 2005
ok well i said i think the speakers are 16 ohms because i tested them with a really ghetto multimeter and it came out to around 18-20 ohms so i just assumed it was 16 ohms. I also rechecked the inputs and there are like i drew. Lastly i did also try swithing the speakers and the same thing happen, the top two move alot more than the bottom two
  Reply With Quote
Old 6th November 2005, 09:02 PM   #13
diyAudio Member
 
Join Date: Nov 2005
oh and as far as the independence of the cab, 4 ohms is the best because the head operates best at 4
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Peavey Max 115 Bass amp Goldpanner Solid State 10 23rd September 2012 12:34 AM
Peavey Mark III Bass 400 B/G? PA Problem soapboxsam Solid State 3 27th May 2009 05:55 AM
peavey cs 800 erockin Solid State 1 30th March 2007 11:38 PM
Peavey MarkIII bass head schematics??? Zero Cool Instruments and Amps 0 2nd February 2007 02:44 AM
need schematic: peavey minx bass amp 30 watts elementx Instruments and Amps 1 12th July 2006 11:59 PM


New To Site? Need Help?

All times are GMT. The time now is 05:22 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2