DIY Pedal - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th September 2004, 10:27 PM   #1
Dwiel is offline Dwiel  United States
diyAudio Member
 
Join Date: May 2003
Location: Bloomington, IN
Default DIY Pedal

Hello, I have seen people ask arround here for schematics for certain effects for pedals... HTats not what I am looking for. I am trying to simply figure out how to make a pedal. I can make one relatively easy that only switches when pressed down, but I'd like one that is connected to a pot.

THe obvious solution is to have the pedal rotate arround an axis which is connected to a pot, but most pots can't handle the kind of forces that a foot pedal is going to be recieving. How can I make it so that the parts which support the pedal and allow it turn are seperate from the pot so that it doesn't have to take any force. It seems that bothe the rotational axis and the POT are needing to be in the smae place...

Also, I could use alluminum/steel/etc, but I dont have a welder so that limits it's uses. I was thinking maybe think plexi would be cool, but I dunno if that is feasible.

If anyone has done this before, or have some ideas on how I could get it figured out, that would be cool.

Also, most pots aren't sensitive enough to measure the full range of maybe 10-20deg that the pedal ever moves... this limits which pots I can use, making it even more difficult.

Thanks
__________________
Dwiel
dwiel.net
  Reply With Quote
Old 17th September 2004, 11:27 AM   #2
diyAudio Member
 
Join Date: Jul 2003
Location: Newcastle, Australia
Pedals such as the Jim Dunlop "CryBaby" quite often have a plastic gear on the pot shaft, with a plastic rack attached to the pedal. The pot can then rotate nearer to its full range and stoppers on the pedal itself prevent strain on the pot. Works well but could be difficult to source materials to implement it. A variation could use a partial large diameter gear mounted on the pedal, driving a smaller gear on the pot. Sometimes plastics gears can be salvaged from discarded printers, fax machines and (my favourite) photocopiers.

Another method I have seen is to not use a pot at all, but an LDR. The pedal has a strip which varies the light (from a bulb or led) that the LDR sees. This was common on very old organs for the swell pedal, and I have seen modern variations using a clear plastic strip with printed gradient pattern. Could be tricky to set up.

Cheers
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pedal lay out sheehanfan Instruments and Amps 0 18th March 2008 07:32 AM
Big Muff FX pedal cqboling Instruments and Amps 10 27th November 2006 01:05 AM
cant get wah pedal goin! elementx Instruments and Amps 1 22nd November 2006 06:24 AM
Diy Distortion Pedal alexmoose Tubes / Valves 8 31st May 2006 11:35 PM
Guitar Pedal Glowin Plates Instruments and Amps 7 9th March 2005 05:16 AM


New To Site? Need Help?

All times are GMT. The time now is 09:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2