Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th June 2004, 02:31 PM   #1
diyAudio Member
 
Join Date: Jun 2004
Location: Miami, FL
Default DIY Readings...

Okay, I'm a straight newbie here. So, some of the terms thrown around in here, I know. But many, I don't.

So, I wanted to ask, being a person who is really interested in the design and development of professional recording equipement (mics, mic pre-amps, consoles, monitors, etc...), what text could I pick up to give me a start towards understanding what goes into creating such products?

I know that the classification most of this would fall under is audio engineering (which began as my major in undergrad but I quickly switched), but it seems like there aren't many texts out there that get into the concrete (more like the theoretical).

So can anybody help me out?
  Reply With Quote
Old 29th June 2004, 02:46 PM   #2
diyAudio Member
 
Join Date: Jun 2004
Location: Miami, FL
Default So I guess...

Know one knows what I'm talking about or I'm just getting the newbie cold shoulder.
  Reply With Quote
Old 29th June 2004, 03:11 PM   #3
diyAudio Moderator Emeritus
 
Bas Horneman's Avatar
 
Join Date: Apr 2002
Location: The Netherlands
Blog Entries: 18
Quote:
mics, mic pre-amps, consoles, monitors, etc.
Nope no cold shoulder ;-) Not a lot of diy'ers are into this.


But just bump this thread every now and then. And you might just attract someone...

www.audioasylum.com have a pro audio section and Kevin Carter of the K&K audio sub forum knows a thing or two about mics and mic preamps...So does Paul Joppa and Doc. B over at the bottlehead sub forum.

Why not try there as well...Maybe be more specific as well. Your title is also very general and does not attract people with the specific knowledge you seek.


Cheers,
Bas
  Reply With Quote
Old 29th June 2004, 03:27 PM   #4
diyAudio Member
 
Join Date: Sep 2002
Location: Rosmalen, The Netherlands
If DIY plans is what you're after (and I feel these are very helpful in coming to grips with different types of electronic circuits), there are a lot of sites where these are presented. One of them is this one: http://www.gyraf.dk/ . And then there is www.machmat.com.
Of course most of these sites are dedicated to vintage valve equipment, since it's no longer available (cost effectively) and delivers a certain "sound", not to mention the fact that it is easier to DIY.

Hope this is of some use, and good luck!

Jarno.

Hope this did relieve you of the "cold-shoulder" feeling?
__________________
Oemptempa petoempetapap
  Reply With Quote
Old 29th June 2004, 09:50 PM   #5
diyAudio Member
 
Join Date: Jun 2004
Location: Miami, FL
Default Thanks a lot guys...

I was starting to think I was getting snubbed.

Happy to know that this isn't that kind of place.
  Reply With Quote
Old 29th June 2004, 10:39 PM   #6
Optical is offline Optical  New Zealand
diyAudio Member
 
Join Date: Nov 2002
Location: Auckland, New Zealand
not 100% professional stuff but excellent all the same

http://sound.westhost.com/projects.htm
  Reply With Quote
Old 30th June 2004, 01:00 AM   #7
diyAudio Member
 
purplepeople's Avatar
 
Join Date: Mar 2003
Location: London, Ontario, Canada
Book title on the tip of tongue and just remembered it...

Craig Anderton: Electronic Projects for Musicians

Got me started on all this when I was younger and gave me a lot of stuff to go and look up. I try not to think of pro gear as different from 'phile quality home stuff, since a lot of it is used interchangeably, especially for playback purposes. Mics and mic pre's, I don't know much about since just about every time I've used a mic it went into a console and used the on-board gain. I do know that you should try to make the signal cleaner and with greater range as you get closer to the source so that your noise doesn't accumulate as you get to the amps.

Sounds cool (so to speak.)

:)ensen.
__________________
Those who claim to be making history are often the same ones repeating it.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
scope readings east electronics Solid State 27 6th March 2009 12:08 PM
X250 current readings? Trigger100 Pass Labs 2 29th August 2008 03:40 PM
Scope readings <-> possible reasons Onvinyl Parts 3 24th January 2007 01:07 PM
Weird Voltage readings after rectifying superR Chip Amps 13 28th November 2006 09:36 PM
diode readings sriegel Solid State 2 21st January 2002 10:55 PM


New To Site? Need Help?

All times are GMT. The time now is 02:41 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2