|Instruments and Amps Everything that makes music, Especially including instrument amps.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|21st March 2004, 09:35 AM||#1|
Join Date: Mar 2004
Extra gain stage Marshall plexi 50watt
I am building a plexi 50 watt and am working out my options.
On the thunder tweak website they have done some modifications on the 50 watt plexi and have sent the first gain stage directly into the next(their version is only single channel).
I was wondering if I could have a 2 channel (normal, bright) amp like a normal plexi, but have a switch that in positon 1 it would:
Send the signal from Normal volume pot(1M) to the 470k mixer resistor.
And in position 2 it would:
Take the signal from the Normal volume pot and send it straight back down into the gain stage for the bright input(pin 7 V1), like the thunder tweak version.
But, would having the normal signal being fed into the bright gain stage screw things up if I had something plugged into the bright channel?
Would this idea work, or do I have no idea what I'm talking about?
|22nd March 2004, 05:58 PM||#2|
Join Date: Mar 2004
you could try using a dpdt switch and use the other set of contacts to disconnect the bright input jack when you are in the high gain position.
If you just use a spdt switch and you have something else such as another guitar pluged into the bright input it will be like putting a resistor ( and some inductance and capacitance ) at that point and tying the other end to ground.
The some of the signal from the normal channel will be sent through the other guitar and you might even be able to change the sound of overdriven signal by changing the tone, volume ,and pickup settings on the unused guitar.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Marshall AVT 50 preamp gain/distortion increase||Voland||Instruments and Amps||3||27th November 2010 02:05 PM|
|Marshall Valvestate 8080 low gain on Boost Channel||mgjimbo||Instruments and Amps||0||28th May 2008 03:04 AM|
|Building Marshall Plexi||zxx123||Instruments and Amps||1||19th June 2004 04:01 PM|
|Building a Marshall Plexi||edsmith||Instruments and Amps||10||18th May 2004 06:38 AM|
|50watt Plexi Again||edsmith||Tubes / Valves||2||23rd March 2004 08:14 PM|
|New To Site?||Need Help?|