Another Fender on the bench.
Looking at the schematic: http://www1.korksoft.com/~schem/fend..._100_schem.pdf at V5A, V5B I measure some strange values.
I measured all resistors surrounding the tube and replaced it with the 7025’s. I tried several of them, V1, V2, V4, same result.
The only cap I changed was the 5 uF at pin 8, with a 4.7µF.
What could be wrong?
Sorry, wrong schematic: It should be the 135W.
So why is the 1.8V and the 12V missing on both cathodes?
Sounds like the tube is not drawing any current, has it lost the ground connection or the cathode resistors gone bad?
Thanks, I forgot to connect the vibrato pedal. When on, the tube turns on as well.
|All times are GMT. The time now is 01:29 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio