i try to build this tube pre amp,

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
i got a very low bass response,and low treble response,only the mid knobs satisfies me,maybe my lay out was wrong,please somebaody help me correct my lay out:D
 

Attachments

  • WP_20160105_12_45_21_Smart - Copy.jpg
    WP_20160105_12_45_21_Smart - Copy.jpg
    394.1 KB · Views: 167
  • WP_20160105_12_46_17_Smart - Copy.jpg
    WP_20160105_12_46_17_Smart - Copy.jpg
    400.1 KB · Views: 169
Yes around the tone stack slope resistor 100K on the layout. The top of 0.047uF is jumping past the 100K straight back to plate. Remove that wire, Connect 100 K from top of 250P to top of 0.1u and the top of the 0.047uF jumps to top of 0.1uF.
The sound your hearing now is basically all the signal shunting through the mid control through 0.047u
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.