voltage to sound - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st April 2013, 11:20 AM   #1
diyAudio Member
 
Join Date: Apr 2013
Default voltage to sound

I have a device that outputs 0 - 5v DC. What's the easiest way to turn that into sound? The most basic would do. Many thanks folks. Looks like a fun forum!

Last edited by budscott; 21st April 2013 at 08:06 PM.
  Reply With Quote
Old 21st April 2013, 06:52 PM   #2
Minion is offline Minion  Canada
diyAudio Member
 
Join Date: May 2006
Location: Cowican Bay , vancouver island
What is the output ?? does it output audio , or DC Voltage or AC voltage and what type of device ??

It"s a very broad non-specific question you have there .....
  Reply With Quote
Old 21st April 2013, 06:58 PM   #3
diyAudio Member
 
Join Date: Apr 2013
It's an EMG sensor. It outputs 0-5 volts and I'd like the output as changing pitches rather than just voltages.
  Reply With Quote
Old 22nd April 2013, 12:29 AM   #4
diyAudio Member
 
indianajo's Avatar
 
Join Date: Jan 2010
Location: Jeffersonville, Indiana USA
You can run the DC to a voltage to frequency converter. Then run the frequency to an powered speaker. V/F converters are in books of NE555 projects, or you can use half of a a NE567 Phase lock loop, or look on one of the circuits websites for a voltage to frequency converter.
Or you can drive a speaker with the dc and an instrumentation amp, but only elephants will hear the sound.
__________________
Dynakit ST70, ST120, PAS2,Hammond H182(2 ea),H112,A100,10-82TC,Peavey CS800S,1.3K, SP2-XT's, T-300 HF Proj's, Steinway console, Herald RA88a mixer, Wurlitzer 4500, 4300
  Reply With Quote
Old 22nd April 2013, 05:11 AM   #5
diyAudio Member
 
Join Date: Apr 2013
Thanks. Sounds like the answer. I'll look into that right away.
  Reply With Quote
Old 22nd April 2013, 05:47 AM   #6
diyAudio Member
 
Join Date: Apr 2013
Would this do?

Click the image to open in full size.

Easy to make?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sound Technology 1700a Voltage Calibration Grid2 Equipment & Tools 0 22nd December 2010 10:20 PM
Sound card input voltage range? J.R.Freeman PC Based 6 17th March 2010 09:16 AM
What makes a voltage source sound good? Onvinyl Power Supplies 28 7th August 2008 07:29 PM
Plate voltage related to sound? jtrujillo Tubes / Valves 1 9th July 2006 06:53 PM
Increase voltage for better sound.... Mikka Solid State 1 18th May 2003 05:23 PM


New To Site? Need Help?

All times are GMT. The time now is 08:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2