FX loop volume control - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th February 2013, 09:42 PM   #1
diyAudio Member
 
Join Date: Jan 2012
Default FX loop volume control

Greetings,

I have a Guitar Tube amplifier with an FX send-return loop. I would like
to create a passive (or active) volume control (attenuator) to insert it in that FX loop to control the volume of the amp (like master volume).
Should it be be line-level? (in general FX loops work at line level or is it irrelevant and is different from amp to amp?)
A 10K potentiometer should be fine or will I have problems with the impedances?

Any response will be appreciated.
Thanks in advance
  Reply With Quote
Old 7th February 2013, 01:41 AM   #2
jjman is offline jjman  United States
diyAudio Member
 
Join Date: Jan 2009
Depends on the output impedance of the "send" but a simple 100k may work.
  Reply With Quote
Old 7th February 2013, 02:18 AM   #3
kevinkr is offline kevinkr  United States
diyAudio Moderator
 
kevinkr's Avatar
 
Join Date: Sep 2004
Location: Boston, Massachusetts
Blog Entries: 6
Moving thread to Instruments & Amplifiers which is the correct place for this discussion. Please look at forum sub-headers before starting a new thread to determine whether or not you are posting to the correct forum.
__________________
"Extraordinary claims require extraordinary evidence." - Carl Sagan
  Reply With Quote
Old 7th February 2013, 11:13 AM   #4
Tesla88 is offline Tesla88  Italy
diyAudio Member
 
Tesla88's Avatar
 
Join Date: Dec 2011
Location: Italy
Try different pots value if you go passive , try a 10K and a 100K , then chose the one operating more linear on control...
  Reply With Quote
Old 7th February 2013, 08:00 PM   #5
Enzo is offline Enzo  United States
diyAudio Member
 
Join Date: Sep 2004
Location: Lansing, Michigan
Yes, a simple pot wired as a "volume control" can be stuck in the FX loop as a master sort of control. I have a 250k in a small metal box with in and out jacks, and a pot thusly wired as a handy level adjuster for around the shop. It works fine for this.


Send wired to top leg of pot, ground/gommon wired to bottom leg of pot, and wiper of pot wired to return.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
fx loop on 5E3 clone famousmockingbird Instruments and Amps 7 24th December 2011 06:30 PM
Tube FX loop? escopunk Instruments and Amps 3 25th November 2011 09:36 AM
bandmaster ab763 fx loop hi_im_sean Tubes / Valves 2 17th November 2009 12:38 PM
FX Loop Mod. Noumenon Instruments and Amps 0 27th September 2007 07:12 PM
remote volume for FX loop? Keithm Instruments and Amps 3 18th February 2004 10:27 AM


New To Site? Need Help?

All times are GMT. The time now is 12:05 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2