New big amp project - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd January 2013, 04:47 AM   #1
diyAudio Member
 
Join Date: May 2010
Location: was Chicago IL, now Long Beach CA
Default New big amp project

This will be kond of a long-term project. I bought an old Sound City 120 chassis, missing tubes and preamp tube covers and knobs and a few broken pots. It uses 6 EL34 output tubes. It has really large Partridge brand transformers; I understand the transformers are worth about $400-$600. I got the chassis on ebay for 258.17 The shipping is going to change it from a great deal to an OK deal. I'm going to see where in Florida it is and whether I can get a friend to hold it until next time I'm in that area.

The chassis and faceplate are a bit rough, so I'd really like to strip it and have the chassis plated. The model has a reputation for noisy tone pots. They way it has an 'active' tone control system, but I have yet to see exactly what that means in the circuit. Sone 'tone gurus' take the chassis and keep the splitter and 6 EL34 output section intact, but change the preamp and tone circuits to a HIWATT circuit and upgrade the turret board, resistors, and caps. Done well, I could end up with the equivalent of a hand-built HIWATT with more power.
  Reply With Quote
Old 2nd January 2013, 09:52 PM   #2
diyAudio Member
 
firechief's Avatar
 
Join Date: Sep 2008
Location: Near Seattle Wa
Just found this schematic - Prowess Amplifiers - Misc - Schematics - Sound City 120
Looks like a fun project.
__________________
"You can keep your insurance baby nothing is guaranteed" -Tom Petty
  Reply With Quote
Old 2nd January 2013, 11:28 PM   #3
diyAudio Member
 
Join Date: May 2010
Location: was Chicago IL, now Long Beach CA
I've uncovered a bit more history too, teaching myself what I could probably have read if I could afford the right books. No wonder the HiWatt look so much like the Sound City. The original HI-WATT amps were Sound City amps that were rewired. There is so much in common mechanically...that's another reason such conversions are still popular today.

There are some lovely ideas in these amps IMHO. There's a very practical aluminum heat radiation reflector / insulator / convection diverter just behind the power tubes. Some also have a similar plate bolted onto the adjacent transformer to keep it cool. Those details, together with the way the brits build guitar amps with the chassis at the bottom, look good to me.

I'm very inclined to add a similar reflector behind the row of power tubes in the Fender Super Twin I converted from combo to head. And a similar aluminum reflector/insulator bolted onto the transformer too. It just may need some small changes to make sure it doesn't ever trap rising heat against the chassis with the way Fender builds their amps upside-down with the chassis at the top. If I had it to do again, I might even have buit the Fender head cabinet with and angled top and split the angle of the faceplate. That would probalby make a big difference in keeping the head cool. I might even consider some kind of flip-out legs at the back; fenders will all cool better with the back of the amp raised, and using the fender tilt-back legs (does anybody??) on a combo or with a head bolted down on those slide-out arms just makes the heat trap much worse!

Last edited by cyclecamper; 2nd January 2013 at 11:32 PM.
  Reply With Quote
Old 2nd January 2013, 11:50 PM   #4
diyAudio Member
 
Passinwind's Avatar
 
Join Date: Dec 2005
Location: Columbia River Gorge, Washington
Quote:
Originally Posted by cyclecamper View Post
using the fender tilt-back legs (does anybody??)
Absolutely, still see it quite often. Even more often I see them using tilt-back stands though. Too bad Fender didn't just use vertically oriented drivers to begin with...

Last edited by Passinwind; 3rd January 2013 at 12:00 AM.
  Reply With Quote
Old 3rd January 2013, 05:41 AM   #5
diyAudio Member
 
Join Date: May 2010
Location: was Chicago IL, now Long Beach CA
Yes, the tilt-back legs point the speakers nicely, but they turn the head cabinet into a hot-air balloon.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello, Big project and where to start? Zaaphod Introductions 3 18th August 2011 11:08 PM
Big Toroids & Big Caps K-amps Swap Meet 10 25th June 2009 07:43 PM
Need help with big DIY project PoorSound Multi-Way 4 18th February 2006 06:33 PM
Hey everyone, I'm back with a new big project!!! chops Subwoofers 64 29th December 2005 03:10 AM
New tube project done in a BIG way Wardsweb Tubes / Valves 19 13th November 2003 11:06 AM


New To Site? Need Help?

All times are GMT. The time now is 08:35 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2