Crossover to protect speakers? - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th November 2012, 01:30 AM   #1
diyAudio Member
 
Join Date: Nov 2012
Default Crossover to protect speakers?

I have a guitar-playing client who frequently uses an octaver very loudly through his guitar amp for large sections of his shows. Needless to say, he blows speakers in his amps often.

I was thinking of building a cabinet with a couple guitar speakers, as well as a bass driver and a passive crossover that passes all frequencies < 80hz to the bass driver. This should protect his guitar speakers, and might even sound better. Is this possible/wise?
  Reply With Quote
Old 26th November 2012, 02:07 AM   #2
Minion is offline Minion  Canada
diyAudio Member
 
Join Date: May 2006
Location: Cowican Bay , vancouver island
generally there are two ways to blow a speaker , one is to feed the speaker too much power which can blow it and the other is to run the amp into clipping which can send DC to the speaker which blows it .......

if he is blowing the speakers from too much power then he needs a higher power speaker if he is blowing the speaker from clipping the amp and sending dc to the speaker then you can put a high value Capacitor in series with the amp output which will block the dc , I would suggest about 10,000 uf at 100v .....
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
capacitor in series protect speakers from getting damaged due to signal clipping crunch123 Solid State 13 10th October 2012 10:53 PM
How to protect my speakers of ,,tup,, sound? Pigy Solid State 6 20th April 2011 10:46 AM
Can this crossover work in my speakers ? kyu Multi-Way 5 5th September 2008 10:28 AM
Crossover for 2.5-way speakers... pixaren Multi-Way 10 10th December 2003 09:39 PM
speakers or crossover first. kvos Multi-Way 7 30th August 2003 12:15 AM


New To Site? Need Help?

All times are GMT. The time now is 12:36 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2