diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Instruments and Amps (http://www.diyaudio.com/forums/instruments-amps/)
-   -   6L6GB Load Line (http://www.diyaudio.com/forums/instruments-amps/200039-6l6gb-load-line.html)

famousmockingbird 7th November 2011 09:43 PM

6L6GB Load Line
 
1 Attachment(s)
Ok so I was looking at Alessandro amps and noticed that he operates a lot of his amps in class A. I have a box of 6L6GB tubes from RCA not being used and was thinking of a Hi-Fi project but after reading about Alessandro amps I wouldn't mind taking a stab at making a class A guitar amp. Going by RCA design values in the datasheet for push-pull class A operation on page 3: http://www.mif.pg.gda.pl/homepages/f...49/6/6L6GB.pdf

plate volts-250
load resistance plate to plate-5000

Blue line is the gradient (250/2500=100mA) and moved up is the green line. I can get 17w plate dissipation with 250v at 68mA (purple dot).

Does this look at all right? Do I need a larger primary impedence? Any help is always welcome.


All times are GMT. The time now is 03:59 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2