making my own basse guitar amp

k7fr · 8th July 2011, 04:00 PM

hello
I like the idea to have and make (from different existing units) my own basse guitar amplifier.

I am a noob in Adio DIY (I used to be a carpenter) but I do know how to, if explained propely.

I have a Power amp (HH VX-600)
and a Pre-Amp (APHEX 207)

how do I make these match?
what kind of speakers should I use ?
is it going to work ?
is it worth the bother ?
Am I out of my mind ?

Thank you for your help !

ingenieus · 8th July 2011, 04:53 PM

I'm no expert, but a single 12" driver is probably a good start.

Here's one that I built earlier this year. It's the TL806 cabinet from an old Electrovoice data sheet (hope that I'm not violating anybody's copyright by adding it

).

I used 21mm MDF and changed the external dimensions to keep the internal volume as in the plans. It came out quite nice.

So far I have only tested it with an external amp. I still have to complete the electronics to go with it.

k7fr · 14th September 2011, 02:09 PM

thank you for the blueprint for making my amp but what I realy want to know is how do I cable up these two units

I have a Power amp (HH VX-600)
and a Pre-Amp (APHEX 207)

tinitus · 14th September 2011, 05:02 PM

Quote:

Originally Posted by k7fr

I have a Power amp (HH VX-600)
and a Pre-Amp (APHEX 207)

how do I make these match?

seem to match perfectly
you have instrument input
you have XLR output
and you have XLR input
I don't see any problem

Minion · 14th September 2011, 10:52 PM

Seems like a no brainer ..... plug bass into preamp , plug pre-amp into power amp , plug power amp into speaker ...... ??

8th July 2011, 04:00 PM	#1
k7fr diyAudio Member Join Date: Jul 2011 Location: Paris	making my own basse guitar amp hello I like the idea to have and make (from different existing units) my own basse guitar amplifier. I am a noob in Adio DIY (I used to be a carpenter) but I do know how to, if explained propely. I have a Power amp (HH VX-600) and a Pre-Amp (APHEX 207) how do I make these match? what kind of speakers should I use ? is it going to work ? is it worth the bother ? Am I out of my mind ? Thank you for your help !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Guitar Cabinet Making	stolenband	Instruments and Amps	2	25th April 2011 02:57 AM
Tube guitar amp for acoustic guitar?	dagerman	Tubes / Valves	15	6th April 2011 02:07 AM
Making and onboard bass guitar preamp	Skywalker83	Parts	7	3rd December 2008 08:42 PM
My 66 Fender bassman tube guitar amp is cutting out intermittently and is making a bl	signalpaths	Tubes / Valves	6	8th June 2008 04:21 PM
Making a beast of an amp	sbattersby 115	Instruments and Amps	29	16th May 2005 03:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th September 2011, 02:09 PM	#3
k7fr diyAudio Member Join Date: Jul 2011 Location: Paris	thank you for the blueprint for making my amp but what I realy want to know is how do I cable up these two units I have a Power amp (HH VX-600) and a Pre-Amp (APHEX 207)

14th September 2011, 10:52 PM	#5
Minion diyAudio Member Join Date: May 2006	Seems like a no brainer ..... plug bass into preamp , plug pre-amp into power amp , plug power amp into speaker ...... ??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)