Reverb trouble-Schematic reading help needed - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 22nd January 2011, 04:14 AM   #1
diyAudio Member
Join Date: Jan 2007
Default Reverb trouble-Schematic reading help needed


I need help attaching the wires(+,-) from the reverb pot to the SPK003 circuit board. They were un-attached when I got the amp. Any help is greatly appreciated.
  Reply With Quote
Old 22nd January 2011, 07:55 AM   #2
singa is offline singa  Singapore
diyAudio Member
Join Date: Apr 2004
Location: near
Send a message via AIM to singa Send a message via MSN to singa Send a message via Yahoo to singa
Hi, As far as I can tell from the schematic ,reverb pot 500K ohm has
3 terminals, one to pin 35 of spk003 board and live terminal of jack.
Center leg to pin 12 of spk002 board.Third one to ground.

You have to check the pot that when you turn fully anticlockwise to get
maximum ohm or minimum ohm? and vice versa with a meter between one or the other pin with
the center pin because the 2 extreme pins will read maximum as rated on the ohm either way. Try it one way or the other.
PS where does the + and - go to the pot?

Last edited by singa; 22nd January 2011 at 08:07 AM.
  Reply With Quote
Old 26th January 2011, 01:11 AM   #3
diyAudio Member
Join Date: Jan 2007
Thank you singa! Finding my way around that architecture from the schematic was too foreign for me.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help reading schematic Renron Multi-Way 14 15th January 2008 08:31 PM
Trouble Reading Blueprints For Fostex Recommended Enclosure kelticwizard Multi-Way 2 13th April 2007 03:18 AM
Schematic Reading Help orson198305 Instruments and Amps 9 26th May 2006 03:23 AM
need schematic reading help jaymanaa Tubes / Valves 2 7th January 2006 11:57 PM
Some trouble reading schematics TStrong_06 Tubes / Valves 55 15th January 2003 12:18 AM

New To Site? Need Help?

All times are GMT. The time now is 01:01 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2