diyAudio (
-   Instruments and Amps (
-   -   Balanced Wet/Dry control (

Franconio 26th March 2009 12:55 PM

Balanced Wet/Dry control
I am trying to figure out how to make an easy to build balanced stereo Wet/Dry control. I want to mix a stereo balanced signal with another stereo balanced signal (namely it will be the compressed signal) and have a pot to control the blend of the two. So I have 12 wires going in and 6 wires coming out.
Any hints? Can I do that with a single multi gang pot?

mjf 27th March 2009 12:16 PM

2 Attachment(s)
gainstage one is summing up the signal (perhaps one pot per channel is enough - if not use for every channel a pot)
and stage two (optional) inverts the signal back to phase integrity(if built with variable gain (pot) you can use it as a master volume per channel.....)
perhaps it can help.......

gain wire 22nd April 2009 12:15 AM

2 Attachment(s)
I believe you can. excuse me, I should say "I would try that because I in theory it can work"

but you'll need a 4 gang pot, which isn't easy to come by, especially in a 1KOhm to 5kOhm value...

Here is my basic idea:

I don't really understand Franconio's idea, where is the blend pot?

Minion 23rd April 2009 05:43 PM

The problem with useing a 4 gang pot is that each wafer in the pot won"t have close enough resistance to retain CMRR and a proper Ballanced signal , the Noise performance will degrade which negates the whole purpose of Ballanced signals...


gain wire 23rd April 2009 05:53 PM

Hmm... yeah well there was bound to be something. That's why I said "in theory it can work".
Oh well!:rolleyes:

All times are GMT. The time now is 10:40 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio