|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Instruments and Amps Everything that makes music, Especially including instrument amps. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
2nd June 2008, 11:18 PM
|
#1 |
|
diyAudio Member
Join Date: May 2005
Location: St. Simons Island, GA
|
Do I need tx's for this project?
Hi all, I am finishing up this project, the "Taos Talkback mic-pre/mixer"http://www7.taosnet.com/f10/floobydust.htm
I am sending a balanced line level stereo pair from my headphone send to this mixer, and I need a balanced stereo pair of line level outputs to go to my headphone distro. This "Taos" project is drawn for an unbalanced stereo input, labeled "Right HP Send In" and "Left HP Send In". The output is also unbalanced, labeled "Right Mix Out" and "Left Mix Out". Do I need 4 600:600 ohm transformers, two on the input and two on the output? I am most likely going to order Edcor transformers.http://www.edcorusa.com/home.html What do you think? |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CDPRO2 Group Project (open source project) | BrianGT | Digital Source | 147 | 8th August 2008 11:37 AM |
| My OLD Project....... cheap tube audio project!!! | tube-lover | Tubes / Valves | 4 | 8th May 2008 09:26 PM |
| first project | ceebmoj | Full Range | 5 | 23rd January 2008 07:51 AM |
| My first project, cool project. | sorinsistem | Solid State | 3 | 19th January 2006 05:08 PM |
| New To Site? | Need Help? |
| Page generated in 0.06997 seconds (64.81% PHP - 35.19% MySQL) with 10 queries |
