audio amp. versus guitar amp - diyAudio
Go Back   Home > Forums > Live Sound > Instruments and Amps
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd February 2008, 10:14 PM   #1
diyAudio Member
Join Date: Oct 2005
Default audio amp. versus guitar amp

Why do guitar amps in general hum and somtime hiss like hell and audio amps in general do not.

(I have both a vox ac30 and an audio innovation 500)
  Reply With Quote
Old 23rd February 2008, 10:18 PM   #2
m6tt is offline m6tt  United States
diyAudio Member
Join Date: Aug 2007
Old guitar amps were commodity items, whereas old hifi amps were expensive. Thus, more time was spent in the old hifi amps to quiet them. Another factor is that most hifi poweramps have at most two gainstages before the power tube (excluding a phono preamp/RIAA)...many guitar amps have more gainstages, and also higher-gain gainstages. this tends to amplify a lot of hum unless careful precautions are taken.
  Reply With Quote
Old 23rd February 2008, 10:21 PM   #3
Join Date: Jul 2007
Well, for starters when you boost your signal to overdrive it so it can be clipped and generate distortion, you're also boosting the noise that's present in the input signal. Hi-Fi amps would in fact do the same thing only you'd never be boosting the signal into clipping like we do for instruments.

However, the more you refine your "distorting" set up, the less noise you'll have aside from the pesky grounding buzz which is really determined by the quality of your power system's ground.

I play with a lot of gain but, unless I'm hitting the strings it's pretty much dead silence and no, I don't use a noise gate of any kind. Just keep experimenting, working with different circuits and toying with the gain levels. You'll find you can get a roaring metal distortion that is pretty darn quite until you hit your strings.

Here's a hint, you don't want your amps gain cranked, a heavily clipped signal sounds pretty lousy whether it's a solid state or tube.
  Reply With Quote
Old 23rd February 2008, 10:30 PM   #4
diyAudio Member
Join Date: Oct 2005
With my audio amp a little hum comes out of the speaker and it changes when i change tubes.

With the guitar amp it doesn't seem to come from the speakers (difficult to be shure though) So what is humming (even without input signal)
  Reply With Quote
Old 23rd February 2008, 10:40 PM   #5
m6tt is offline m6tt  United States
diyAudio Member
Join Date: Aug 2007
I would imagine it is coming from the speakers, but a way to check would be to attach lamp cord to the speaker output on the amp (disconnect the original speaker), and use another 8ohm speaker quite a distance away. Then the speaker and the amp will be somewhat isolated. Sometimes if there is a power transformer problem, the transformers will hum if they are under too much load, but I'd imagine your hum is coming from the speaker. Different tubes hum differently, even within a different type. If your input tube is a 12ax7, you could try a 12ay7 to reduce gain at the input and input tube hum (12ay7 is a low-noise low-hum type). If it's a pentode like ef86, try using different ef86 tubes, some are better than others. Long guitar cables hum way more than short ones, and long extension cords can introduce hum into the power supply. Try turning the volume off on the instrument, if hum persists, it's probably the cable or the amp--guitar strings are essentially antennae.
  Reply With Quote
Old 23rd February 2008, 11:49 PM   #6
diyAudio Member
Join Date: Oct 2005
detaching the speakers is a good idea.

What about changing heater supply from ac to dc for the three 12ax7's
  Reply With Quote
Old 24th February 2008, 04:43 AM   #7
diyAudio Member
Join Date: Nov 2006
How old is the amp? Which one hums? The AC30? It may be a grounding issue or an elec cap NFG. Do you know if the hum is 60Hz or 120Hz?

As for hiss - not unusual for a high gain amp. Guitar amps are design quite different than hi fi amps, and consequently hvae these kinds of idiosyncrasies.

  Reply With Quote
Old 24th February 2008, 06:09 AM   #8
SHiFTY is offline SHiFTY  New Zealand
diyAudio Member
SHiFTY's Avatar
Join Date: Jul 2002
Location: New Zealand
some 12AX7s i've used in guitar amps have been dead quiet in the phase splitter but unusable in the front end- hissssss!

You need a box of old 12AX7s and then you can sift through for quiet ones.

As for hum, that can be reduced a lot by using regulated DC filaments on the preamp and a decent grounding strategy.
  Reply With Quote
Old 24th February 2008, 06:54 AM   #9
diyAudio Member
Geek's Avatar
Join Date: Sep 2004
Hmmm, I've never designed a noisy guitar amp and also never needed DC filaments. All of them have headphone outputs and are quieter than any SS guitar amp I've tried.

Just decent layouts, proper tube selection (keep 12AX7's out of the V1 position) and bias the heaters +40V or so above ground and instant quiet

  Reply With Quote
Old 24th February 2008, 09:48 AM   #10
diyAudio Member
Join Date: Oct 2005
if the hum is 60Hz or 120Hz?

In europe it's 50-100hz. i have to dubbelcheck because i am already disassembling parts, but i think it's a 50hz i am hearing.
(ok i checked my hearing-memory with a wave generator, it must be a 50hz i am hearing)

I swapped tubes and used my dead quiet ones from my audio-amp.
I even removed a tube which is used for a kind of boost channel with only little effect.

The 50hz hum doesn't seem to be increasing very much, if i turn up the volume.

So what is the next suspect? A cheapy transformer or choke.
What about the tube rectifier
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio coaxial cable for guitar akis Instruments and Amps 3 22nd August 2009 05:02 PM
POOR MAN Teres Audio Versus Motor guglielmope Analogue Source 0 20th May 2009 09:25 PM
Need help selecting and LOCATING the best op-amp for guitar audio jeghers Instruments and Amps 4 2nd January 2009 03:46 AM
Best Op-Amp for audio (guitar) LesPaulStandard Instruments and Amps 35 15th November 2008 06:53 PM
Car audio versus HiFi drivers in ELF or Linkwitz subwoofer halfgaar Subwoofers 28 15th August 2008 10:17 AM

New To Site? Need Help?

All times are GMT. The time now is 06:40 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2