|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Instruments and Amps Everything that makes music, Especially including instrument amps. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
26th September 2007, 10:26 AM
|
#1 |
|
diyAudio Member
Join Date: Sep 2007
|
5 pin din power supply?
Hi folks, I have an old flanger by electrolabs and it sounds great. The problem is that it takes 2 x 9v batteries and as I am gigging with it I need to figure out how to supply it with mains power.
It has 5 pin din input sockets either side and little plastic lugs - presumably for attaching other units to it. If anyone out there has any thoughts on this I would be most grateful for your advice. |
|
|
26th September 2007, 12:09 PM
|
#2 |
|
diyAudio Member
Join Date: Jul 2005
Location: North Derbyshire
|
The connections on the side are for linking other effects pedals together, so you don't have to link them via jacl leads. I don't know if they tranfer power as well or not?, but it would be simple to add an external power socket to it - bear in mind you need a +9V/0/-9V split supply.
I've got exactly the same pedal, my daughter got it from school as they were throwing it out.
__________________
Nigel Goodwin |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Split Voltage Switching Power Supply for Power Amp | vectorplane | Swap Meet | 2 | 23rd April 2011 11:48 PM |
| LTspice tool for power amp power supply component evaluation | andy_c | Software Tools | 2 | 23rd August 2009 05:10 PM |
| Can i use a computer power supply to power audio amplifiers? | destroyer X | Solid State | 91 | 25th September 2006 04:36 AM |
| selling high current power supply for power amps. | ericpeters | Swap Meet | 0 | 14th January 2005 02:21 PM |
| heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED? | jarthel | Tubes / Valves | 10 | 21st July 2003 01:30 PM |
| New To Site? | Need Help? |
| Page generated in 0.07042 seconds (67.61% PHP - 32.39% MySQL) with 11 queries |
