|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Headphone Systems Everything to do with Headphones |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
29th January 2007, 09:23 PM
|
#1 |
|
diyAudio Member
Join Date: Jul 2004
Location: Georgia
|
need help with adding headphone output to S5 Electronics kit / K501 kit
I got my tube amp functional but would like to add headphone capability to it. It can even replace the speaker outputs.
According to this link, I should just be able o put a 100ohm, 2W resistor between each channel. Is that all there is too it ? http://www.headwize.com/faqs.htm#amp I am hesitant to try until I hear from you more experienced DIYers. Any advice how to do this - I am still new at this so please keep the jargon simple  Thanks Neville |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tube preamp: adding headphone out | then_dude | Headphone Systems | 10 | 19th July 2012 11:02 AM |
| K501 vs K12M | jmillerdoc | Tubes / Valves | 4 | 18th November 2009 06:42 PM |
| Adding secondary of output transformer into cathodes of output stage ? Eico ST-70 | freddymac406 | Tubes / Valves | 3 | 21st April 2007 06:15 PM |
| adding a headphone jack | Bama Slamma | Headphone Systems | 1 | 13th March 2007 01:36 PM |
| Adding a sub output to a SI | jarros | Class D | 4 | 21st April 2005 08:22 PM |
| New To Site? | Need Help? |
