Hi
Getting back into Electronics/Audio and on designing the PCB for the Gilmore Dynamic Headphone Amplifier.
A few questions! Ive noticed on the Gilmore Website for the Kit/Ready Made units the PCBs have 4 variable blue presets - any ideas what this is for compared to the circuit posted here http://headwize.com/projects/showfile.php?file=gilmore3_prj.htm
Also any ideas what the new equivanlents will be for 2SC1815/2SA1015/2SK389/2SJ109 transistors?
Regards and thanks in advance.
John
P.S Anyone other newer designs anyone know/recommend?
Getting back into Electronics/Audio and on designing the PCB for the Gilmore Dynamic Headphone Amplifier.
A few questions! Ive noticed on the Gilmore Website for the Kit/Ready Made units the PCBs have 4 variable blue presets - any ideas what this is for compared to the circuit posted here http://headwize.com/projects/showfile.php?file=gilmore3_prj.htm
Also any ideas what the new equivanlents will be for 2SC1815/2SA1015/2SK389/2SJ109 transistors?
Regards and thanks in advance.
John
P.S Anyone other newer designs anyone know/recommend?
The trimmers are for DC-offset adjustment. If you read the assembly instructions for the Rev. C board from www.djgardner.com everything should be much clearer
As for the transistors, the SA1015/SC1815 should be obtainable and I am not aware of any replacements for these in the Gilmore amps. The replacements for the FETs are matched pairs of 2SK170/2SJ74s.
/U.
As for the transistors, the SA1015/SC1815 should be obtainable and I am not aware of any replacements for these in the Gilmore amps. The replacements for the FETs are matched pairs of 2SK170/2SJ74s.
/U.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.