connect two inverting op amps together connect two inverting op amps together - Page 4 - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Headphone Systems Everything to do with Headphones

connect two inverting op amps together
connect two inverting op amps together
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd November 2013, 10:17 PM   #31
Johno is offline Johno  Australia
diyAudio Member
Johno's Avatar
Join Date: Oct 2010
Location: Tanunda SA
Perhaps head phone load at gain = 4 exceeds the output rating, unless you have a finger (around 1k at that voltage) in series with the load.

And now you know why it is good to minimise as well as balance the input resistances to op amps. Note that while fet inputs have high DC resistance they also have large input capacitance, it is the capacitive current with AC signals that acts like an input bias current and causes amplitude distortions when unbalanced rather than DC offsets.

I hope you are now learning to carefully evaluate what people here say.
  Reply With Quote
Old 23rd November 2013, 10:54 PM   #32
nigelwright7557 is offline nigelwright7557  United Kingdom
diyAudio Member
nigelwright7557's Avatar
Join Date: Apr 2008
Location: Carlisle, England
While you have had lots of advice on resistor values around op-amps no one has mentioned the power supply.
Make sure you use star grounding or you will get massive hum.

I threw together a pcb for a 6 channel mixer and when I built it the hum was at an unbearable level.
I found the hum was coming from smoothing capacitors charging up and causing a pulse on the ground line.
I re-laid out the pcb with the power supply separated and it worked a treat.
Murton-Pike Systems PCBCAD51 pcb design software.
  Reply With Quote


connect two inverting op amps togetherHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
non inverting op amp input impedance help sirus the virus Solid State 5 8th December 2010 06:11 PM
Inverting op amp out of phase? RobertE Analog Line Level 10 2nd December 2010 07:12 PM
Burr Brown op amps,in amps,power op amps for sale magneticnorth Vendor's Bazaar 1 23rd September 2010 10:50 PM
inverting / non-inverting op-amp circuits Learnincurve Solid State 11 21st January 2005 05:40 PM
Inverting/non-inverting Op-amp Inputs !!!help!!! IIR Solid State 17 11th May 2002 02:02 AM

New To Site? Need Help?

All times are GMT. The time now is 10:55 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio