Hi, all. I just learn how to use LTSPICE and I want to modify VSSA for headphone amplifier.
Here, my schematic diagram. I use +15V,0,-15V power supply and approximately 100mA for quiescent current output transistor. The simulation is good. But I want suggestions from the experts if I miss something here.
Here, my schematic diagram. I use +15V,0,-15V power supply and approximately 100mA for quiescent current output transistor. The simulation is good. But I want suggestions from the experts if I miss something here.
Attachments
1.5W power dissipation for each output power transistor.
Transistors rated for 12.5W @ Tc of 25C
or 1.25W at Ta of 25C
Heat sink is required.
Just in case you forgot.
Thank you, Dug. I will remember it
I have +/- 15V VSSA original 6-transistor circuit running. It puts out 4.8 vrms before clipping.
I think 2sj162 and 2sk1058 lateral mosfet is too much and too expensive for headphone amplifier. I made VSSA with lateral mosfet for my 8 ohm speaker.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.