diyAudio (
-   Headphone Systems (
-   -   akg k140 earpads (

fly72 16th December 2012 03:17 PM

akg k140 earpads
How to replace earpads on k140?
The headphones are in very good condition, but not used for a long time, so the pads are deformed only where they rest against each other.

fly72 19th December 2012 01:49 PM

2 Attachment(s)
photos of pads

mjf 19th December 2012 03:55 PM

have you tried to clean it with a moist (not wet) piece of cloth a few times.......perhaps they will come in form again.

backefel 19th December 2012 04:10 PM

Is it the same pads as K141? If that's the case it seems to be a bayonet system.

( sells replacement pads)

fly72 21st December 2012 05:55 PM

it's not the same as on k141, the pads are bonded (glue), i've recently read somewhere on the internet

i will try to put on them a thin layer of castor oil, to heat it with air, and maybe use a vacuum to bring back to old shape

sgrossklass 25th December 2012 09:29 PM

I would ask AKG customer service for some new pads (I read some time ago that they were still able to provide these glued ones). The old ones have probably become hard as the softeners evaporated. You might be able to do something with generous doses of glycerin but I wouldn't bet on it.

All times are GMT. The time now is 12:35 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio