Audez'e LCD-2 - help needed for a DIY cable build

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
D

Dogpile

Member
Joined 2005
This will be my first attempt at making a headphone cable and would like to know if this is the way to go about it...

Unbalanced cable using a 1/4" TRS plug and 2 mini 4-pin XLR's for the headphone end, left and right.

Is this the correct way for wire hookup? See diagram below....:hphones:
 

Attachments

  • Audeze-lcd2-wiring-scheme.png
    Audeze-lcd2-wiring-scheme.png
    66.2 KB · Views: 206
  • rean.JPG
    rean.JPG
    16.8 KB · Views: 189
qusp

qusp

Member
Joined 2009
up to you, its done internally in the headphones afaik, never had a complaint, but if you want to be 100% sure it wont hurt to short them. some places do silly things like using 4 wires, when lcd-2 is one of the easiest headphone loads around
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom