O2 enclosures. Something less clunky?

lorriman · 25th April 2012, 07:51 PM

Ladies and gents,

Anyone found an enclosure that is a bit less clunky than the B02 and B03 aluminium tanks?

I noticed also that there is a fair amount of space underneath the pcb if the soldering is properly trimmed. Sitting the larger parts down on the pcb also yields a couple of milimeters clearance at the top. The current enclosure is much higher than it need be.

Rounded shoulders might be nicer also. And plastic.

Even just similarly sized enclosures but without the unnecessary ridges would be good.

I haven't found anything myself but I'm not experienced at this.

Jaimo · 29th June 2012, 03:53 AM

Not sure if you are still looking...

Hammond have a stomp box with rounded edges in funky colors. It is still clunky though!

Hammond 1590BBRD Diecast Box For Effects Pedals, Red

DJNUBZ · 29th June 2012, 05:25 PM

I have considered a 3d printed enclosure but I don't know when I will have time to get to it. It's a shame someone doesn't make a flat NIMH battery that could be wired in. You could make the o2 quite thin that way.

s3tup · 2nd July 2012, 05:11 PM

These seem cute:
HQ Hand-Held Project Enclosure Box Case,Black-White, 126 x 81 x 30mm. | eBay
Desktop Instrumentation Project Enclosure Box Case, White-Brown, 95x55x23mm. | eBay

There may be different sizes to fit O2...

25th April 2012, 07:51 PM	#1
lorriman diyAudio Member Join Date: Nov 2011 Location: Surrey	O2 enclosures. Something less clunky? Ladies and gents, Anyone found an enclosure that is a bit less clunky than the B02 and B03 aluminium tanks? I noticed also that there is a fair amount of space underneath the pcb if the soldering is properly trimmed. Sitting the larger parts down on the pcb also yields a couple of milimeters clearance at the top. The current enclosure is much higher than it need be. Rounded shoulders might be nicer also. And plastic. Even just similarly sized enclosures but without the unnecessary ridges would be good. I haven't found anything myself but I'm not experienced at this.

29th June 2012, 05:25 PM	#3
DJNUBZ diyAudio Member Join Date: May 2003 Location: Chicago	I have considered a 3d printed enclosure but I don't know when I will have time to get to it. It's a shame someone doesn't make a flat NIMH battery that could be wired in. You could make the o2 quite thin that way. __________________ My 3d printing startup, need something printed? Car Audio Connoisseur

2nd July 2012, 05:11 PM	#4
s3tup diyAudio Member Join Date: Dec 2004 Location: Israel	These seem cute: HQ Hand-Held Project Enclosure Box Case,Black-White, 126 x 81 x 30mm. \| eBay Desktop Instrumentation Project Enclosure Box Case, White-Brown, 95x55x23mm. \| eBay There may be different sizes to fit O2... __________________ The missing link between lead and gold in alchemist's world was BS and commerce.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
o2 parts canada	jtktam	Group Buys	46	7th August 2012 12:40 PM
Help with BantamDAC and O2 Amp	jschristian44	Headphone Systems	2	27th January 2012 05:22 PM
O2 power on trouble	cheapskateaudio	Solid State	2	10th November 2011 04:29 AM
o2 amp building	jtktam	Vendor's Bazaar	0	3rd November 2011 09:52 AM
FS: Aluminum Enclosures Par-Metal Enclosures	PHilgeman	Swap Meet	6	28th May 2011 07:42 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th June 2012, 03:53 AM	#2
Jaimo diyAudio Member Join Date: Oct 2005	Not sure if you are still looking... Hammond have a stomp box with rounded edges in funky colors. It is still clunky though! Hammond 1590BBRD Diecast Box For Effects Pedals, Red

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read