TPA6120 power supply?
Hello, what will I miss if I use a +/- 10 V regulated PSU instead of 12-15V as suggested sometimes, to be used with a 70 ohms/120dB headphone? Thanks!
your spl=120db per 1mW
your amp must give : I=0,003779~0,004A=4mA(for 120db peak)
U=0,004mA*70Ohm=0,28V(for 120db peak)
with +/-10V amp can give ~ 6,5/7V of signal.
But you need only ~0,3V(for 120db peak)
for 120db rms you need U=0,3*1,4=0,42V => you can easy use +/-10V
|All times are GMT. The time now is 12:27 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio