"The Wire" Remaining Headphone Amp Boards and Kits - Page 15

opc · 22nd February 2012, 12:24 PM

Hi Guys,

Payments have been received from pretty much everyone, and almost everything has shipped, or at least been packed. As per usual, if your order is in green, it has already shipped, if you're marked as paid, then your order has been packed and will ship tomorrow morning.

As for non-payments, wendell c has dropped off the list, and I have yet to hear anything from TrickyMicky which I think means he's not interested in the boards without the mosfets. Either way, I'm going to remove both of the from the order and scan through the list to see if anyone wants their items. If I don't find anyone, I'll post them up here yet again.

I'd like to extend another big thanks to everyone who paid quickly! You guys have helped to make this one of the fastest overall turnarounds I've ever done. Everything will have shipped within a week of payment requests going out!

Cheers,
Owen

TiEx · 22nd February 2012, 12:26 PM

Hi Owen. I'm not in green in this list, but I have made the money transfer. Are there any problems?

HelmutHolz · 22nd February 2012, 12:38 PM

Hello Owen,
in List is one SE-SE PCB left, if it is still available I would go for it, but I fear, you have a list of persons waiting for this chance! I will have problems to go online the next days but I am, as already expressed, quite interesseted

best regards,

Helmut

opc · 22nd February 2012, 12:40 PM

Nope, no problems... You're marked as paid, which means your order is packed and ready to ship, but I won't be making a trip to the post office until tomorrow.

Once it has officially shipped out, I'll mark it in green. All of this is explained in the above post

Cheers,
Owen

TiEx · 12:53 PM

Thanks Owen. So anxious to start building the amp. But as you already seen in other threads, now it is a big dilemma for me. Need to choose a good way to control the volume. So I'm not in a hurry, have to think of a good design and a good PSU.

qusp · 22nd February 2012, 02:31 PM

the psu is not as critical as with many builds due to the huge PSRR, you should be able to make up a suitable regulated supply on perfboard or protoboard

TrickyMicky · 22nd February 2012, 03:20 PM

Hi OPC

I still want them, I was waiting for a pm on how to pay etc.

Let me know how how you want to proceed and I'll pay straight way.

Sorry for any confusion from my side.

Regards

merlin2069er · 24th February 2012, 02:49 PM

Got my boards in today!

Thanks!

Mikett · 25th February 2012, 04:18 PM

Got my board today.
I must say someone has terrific penmanship!
Thanks!

qusp · 26th February 2012, 01:10 AM

Quote:

Originally Posted by Mikett

Got my board today.
I must say someone has terrific penmanship!
Thanks!

doesnt she! Owen's other half sure has skills. mate you guys should come up with some platitudes and do greeting cards =D

22nd February 2012, 12:52 PM	#145
TiEx diyAudio Member Join Date: Feb 2012	Thanks Owen. So anxious to start building the amp. But as you already seen in other threads, now it is a big dilemma for me. Need to choose a good way to control the volume. So I'm not in a hurry, have to think of a good design and a good PSU. Last edited by TiEx; 22nd February 2012 at 12:53 PM. Reason: correcting spelling

24th February 2012, 02:49 PM	#148
merlin2069er diyAudio Member Join Date: Sep 2008 Location: Toronto	Got my boards in today! Thanks! __________________ F5 / B1 / dcb1 / Monica Dac / ezDac / Dynaco ST 35 / jFet BOZ / Lightspeed attenuator *** my amazon shop * books & dvds ***

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"The Wire" Ultra-High Performance Headphone Amplifier - PCB's	opc	Headphone Systems	1513	7th May 2012 08:21 PM
Braided speaker wire "filler", kimber weave directions	jmb14731	Parts	3	4th June 2008 10:23 PM
Does anyone here put together DIY amp "kits"	Gomer	Solid State	3	25th May 2001 03:22 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd February 2012, 12:26 PM	#142
TiEx diyAudio Member Join Date: Feb 2012	Hi Owen. I'm not in green in this list, but I have made the money transfer. Are there any problems?

22nd February 2012, 12:38 PM	#143
HelmutHolz diyAudio Member Join Date: Mar 2009 Location: Germany	Hello Owen, in List is one SE-SE PCB left, if it is still available I would go for it, but I fear, you have a list of persons waiting for this chance! I will have problems to go online the next days but I am, as already expressed, quite interesseted best regards, Helmut

22nd February 2012, 12:40 PM	#144
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	Nope, no problems... You're marked as paid, which means your order is packed and ready to ship, but I won't be making a trip to the post office until tomorrow. Once it has officially shipped out, I'll mark it in green. All of this is explained in the above post Cheers, Owen

22nd February 2012, 02:31 PM	#146
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	the psu is not as critical as with many builds due to the huge PSRR, you should be able to make up a suitable regulated supply on perfboard or protoboard

22nd February 2012, 03:20 PM	#147
TrickyMicky diyAudio Member Join Date: Nov 2007	Hi OPC I still want them, I was waiting for a pm on how to pay etc. Let me know how how you want to proceed and I'll pay straight way. Sorry for any confusion from my side. Regards

25th February 2012, 04:18 PM	#149
Mikett diyAudio Member Join Date: Aug 2003 Location: Toronto	Got my board today. I must say someone has terrific penmanship! Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)