Source for tiny connectors? - Page 2

qusp · 02:26 PM

the ones above are cast by me around a thicker 24awg conductor than stock and you might notice that they are designed to fit into the recessed socket of UE11, which doesnt allow the whole cable width, let alone a moulding around it.

i was referring to the ones i linked a couple of posts up on ebay and no, the other ones further up this page are not larger, but they are slightly 'taller' to allow the cable and a more usefully thick memory wire to be more solidly anchored by material

MannyE · 10th December 2011, 03:00 PM

Hey guys! Thanks so much for all the fantastic information!

I unfortunately CAN'T SEEM TO FIND MY $400 FREAKING HEADPHONES

to even take the picture!!!!

But without having them in hand, it seems that those sources might be perfect for what I need. The other option I had was to buy a cheaper set of replacements and simply cannabalize them for the connector...

7th December 2011, 02:22 PM	#11
qusp is choosing a less facetious title... diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	the ones above are cast by me around a thicker 24awg conductor than stock and you might notice that they are designed to fit into the recessed socket of UE11, which doesnt allow the whole cable width, let alone a moulding around it. i was referring to the ones i linked a couple of posts up on ebay and no, the other ones further up this page are not larger, but they are slightly 'taller' to allow the cable and a more usefully thick memory wire to be more solidly anchored by material Last edited by qusp; 7th December 2011 at 02:26 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
anyone know of a source for 12 pin+ connectors?	ryuji	Tubes / Valves	16	22nd July 2011 01:44 AM
Source for .110", 26-20AWG Female Spade Connectors (for speakers & such)	EchoWars	Parts	0	4th December 2008 05:25 AM
Source for connectors?	DigitalJunkie	Parts	7	23rd October 2006 09:13 AM
Source for tonearm connectors	Valverine	Analogue Source	1	28th May 2004 02:50 PM
Source for good quality RCA and Banana connectors	Bricolo	Parts	8	4th June 2003 03:18 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th December 2011, 03:00 PM	#12
MannyE diyAudio Member Join Date: Dec 2000 Location: Miami Beach	Hey guys! Thanks so much for all the fantastic information! I unfortunately CAN'T SEEM TO FIND MY $400 FREAKING HEADPHONES to even take the picture!!!! But without having them in hand, it seems that those sources might be perfect for what I need. The other option I had was to buy a cheaper set of replacements and simply cannabalize them for the connector...