The Objective2 (O2) Headphone Amp DIY Project

[jtktam]

Originally Posted by lorriman

That would great, joe. I think I'll have to pay postage as we're on different continents.

Any Euro zone persons with spare screws and even better spare faceplates? Willing to pay postage, of course.

I can just throw it into the envelope and put a stamp on it..

-joe

[MrSlim]

Originally Posted by lorriman

I think this:

http://lifehacker.com/5903575/unleas...-and-amplifier

needs a bit of ODAC attention.

I doubt that Lifehacker is very DIY friendly..

[CrustyD3mon]

and anyone in europe have a spare b2 black box to send me? i paid one to jokener GB but never receive anything....and can't find one...::S

[jtktam]

Originally Posted by CrustyD3mon

and anyone in europe have a spare b2 black box to send me? i paid one to jokener GB but never receive anything....and can't find one...::S

i got tons.. pm me

-joe

[swalter]

Originally Posted by CrustyD3mon

and anyone in europe have a spare b2 black box to send me? i paid one to jokener GB but never receive anything....and can't find one...::S

Hi CrustyD3mon,

I will get a shipment of cases similar to the B2 by the end of next week, I will also have the matching front panels to go with it.

Stefan

[CrustyD3mon]

Originally Posted by swalter

Hi CrustyD3mon,

I will get a shipment of cases similar to the B2 by the end of next week, I will also have the matching front panels to go with it.

Stefan

The cases are in the same dimension? i only ask because i already have the proper front pannel...whats the price?

[swalter]

Originally Posted by CrustyD3mon

The cases are in the same dimension? i only ask because i already have the proper front pannel...whats the price?

yes, the dimensions are the same, the outer surface is different and the mounting holes are for M2.5 threads. The corner radius is R4 on case and panels compared to R3 on the B2 panels.
Prices are listed in my shop, see the first link below, the case, including 2 blank panels, 8 screws and 4 rubber feet, will cost 11.99 CHF for buyers outside of Switzerland (- 8% VAT).

Stefan

[CrustyD3mon]

Originally Posted by swalter

yes, the dimensions are the same, the outer surface is different and the mounting holes are for M2.5 threads. The corner radius is R4 on case and panels compared to R3 on the B2 panels.
Prices are listed in my shop, see the first link below, the case, including 2 blank panels, 8 screws and 4 rubber feet, will cost 11.99 CHF for buyers outside of Switzerland (- 8% VAT).

Stefan

The pannel that i have is this:



the holes have the same posision in that "R3" case?

[swalter]

Originally Posted by CrustyD3mon

the holes have the same posision in that "R3" case?

R3 is the corner radius of your panel, my case has a corner radius of R4, so 1mm wider. Meaning the corners of your panel will stick out slightly. The positioning itself is exactly the same.

Stefan

[CrustyD3mon]

Originally Posted by swalter

R3 is the corner radius of your panel, my case has a corner radius of R4, so 1mm wider. Meaning the corners of your panel will stick out slightly. The positioning itself is exactly the same.

Stefan

Ahh ok! thanks for the explanation....can you post a pic of those black cases that you have?