"The Wire" Ultra-High Performance Headphone Amplifier - PCB's - Page 62

qusp · 7th August 2011, 12:54 PM

I dont think we have any trouble for numbers, just opc finding time i think

marcpane · 12th August 2011, 09:43 AM

Hi,

I'm intrested in a BAL-UNB KIT + PSU
Thanks!

Marco

tjurny · 14th August 2011, 11:35 PM

1. Do you prefer a board only, or a full kit? Board only.
2. Would you rather have a PSU included or not? PSU board incluaded.
3. Would you be interested in a fully balanced version (bridged output with two LME49990) or the existing version? Existing version (BAL - SE)
4. How many units are you interested in? 1

rtos · 16th August 2011, 03:30 PM

Please remove me from the list. I've decided to go with something else. Thanks.

thegr8brian · 27th August 2011, 04:05 AM

Please remove me as well.

gtrbmart · 04:36 AM

Quote:

Originally Posted by thegr8brian

Please remove me as well.

I've found something else I'm going to use, sorry. Please remove me.

tinitus · 27th August 2011, 04:36 AM

please post something other than just a quote

moderation

qusp · 05:04 AM

Owen, whats up mate?, i think you are losing everyone to the O2. imo your amp is the better of the 2 (and the O2 doesnt offer balanced in or out, which is imperative to me) speaking just of amp circuits (the O2 has a pretty interesting psu), obviously the O2 is the more complete portable package and does seem to be a good design, me, i prefer to use higher performance parts and without caps in the signal path, regardless of whether i can hear the difference, it makes me feel better

without contact or movement here they will continue to depart and tbh mate i cant say i blame them. we know you are busy and i totally understand that, you gotta pay the bills, but probably best to not take on these projects if you cant find the time to complete them.

idlehands · 14th September 2011, 11:13 PM

How does 'The Wire' sound musically compared with other amps?

qusp · 15th September 2011, 05:41 PM

ive already posted my impressions in here and if you want any meaningful input, you might want to narrow that down a bit

27th August 2011, 04:56 AM	#618
qusp is choosing a less facetious title... diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	Owen, whats up mate?, i think you are losing everyone to the O2. imo your amp is the better of the 2 (and the O2 doesnt offer balanced in or out, which is imperative to me) speaking just of amp circuits (the O2 has a pretty interesting psu), obviously the O2 is the more complete portable package and does seem to be a good design, me, i prefer to use higher performance parts and without caps in the signal path, regardless of whether i can hear the difference, it makes me feel better without contact or movement here they will continue to depart and tbh mate i cant say i blame them. we know you are busy and i totally understand that, you gotta pay the bills, but probably best to not take on these projects if you cant find the time to complete them. Last edited by qusp; 27th August 2011 at 05:04 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which Pass Aleph diy board for "no-cost-object" headphone amplifier?	Hammerklavier	Headphone Systems	43	7th August 2010 03:35 PM
Improvments to "Tube Headphone Amplifier/Preamp with Relay-Based Input and Power Swi"	kipman725	Headphone Systems	4	17th August 2009 06:12 PM
Project 11.1 from Slone "High-Power Amplifier" Book	Karl71	Solid State	46	6th October 2008 03:47 AM
The "Freebird" ultra clean ultra simple preamp design	Russ White	Chip Amps	87	11th August 2008 09:28 AM
My A.N.T. "Amber" headphone amplifier	x-pro	Headphone Systems	8	1st October 2007 08:47 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th August 2011, 12:54 PM	#611
qusp is choosing a less facetious title... diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	I dont think we have any trouble for numbers, just opc finding time i think

12th August 2011, 09:43 AM	#612
marcpane diyAudio Member Join Date: Oct 2010	Hi, I'm intrested in a BAL-UNB KIT + PSU Thanks! Marco

14th August 2011, 11:35 PM	#613
tjurny diyAudio Member Join Date: Aug 2011	1. Do you prefer a board only, or a full kit? Board only. 2. Would you rather have a PSU included or not? PSU board incluaded. 3. Would you be interested in a fully balanced version (bridged output with two LME49990) or the existing version? Existing version (BAL - SE) 4. How many units are you interested in? 1

16th August 2011, 03:30 PM	#614
rtos diyAudio Member Join Date: May 2011	Please remove me from the list. I've decided to go with something else. Thanks.

27th August 2011, 04:05 AM	#615
thegr8brian diyAudio Member Join Date: Jun 2011 Location: Boston, MA	Please remove me as well.

27th August 2011, 04:36 AM	#617
tinitus diyAudio Moderator Join Date: Nov 2005	please post something other than just a quote moderation

14th September 2011, 11:13 PM	#619
idlehands diyAudio Member Join Date: Aug 2009	How does 'The Wire' sound musically compared with other amps?

15th September 2011, 05:41 PM	#620
qusp is choosing a less facetious title... diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	ive already posted my impressions in here and if you want any meaningful input, you might want to narrow that down a bit