Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Headphone Systems Everything to do with Headphones

shure e530: splicing a non-detachable cable
shure e530: splicing a non-detachable cable
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th November 2010, 12:42 PM   #1
mattkarikomi is offline mattkarikomi
diyAudio Member
Join Date: Nov 2010
Default shure e530: splicing a non-detachable cable

the cable of the right monitor has just started crackling again. this is the second time and shure decided to replace the whole unit when it came up before. attached are some images of my attempts to splice the cable. its near the monitor so the splice needs to be kept flexible. this job is not performing adequately. any reccomendations on how to proceed? this unit is out of warranty and im not about to sink another $450 on this piece of junk while saving up for a pair of jerry harvey's.
Attached Images
File Type: jpg e530-1.jpg (81.1 KB, 60 views)
File Type: jpg e530-2.jpg (101.6 KB, 60 views)
File Type: jpg e530-3.jpg (107.1 KB, 59 views)
  Reply With Quote
Old 30th November 2010, 11:09 PM   #2
curva is offline curva
diyAudio Member
Join Date: Dec 2004
Location: the web
Cut the wires, recable it with something better, problem solved.

Detail: if you heat the wire at an edge where you cut it and apply some solder onto it using a hot tip(around 400C seems fine), the entire protective layer that isolates the wires will start "boiling" and will evaporate or mix with the solder. Remove the solder with the soldering tip, add new solder. Now reduce the temperature of the tip, say 330C, remove the solder again, add solder again one last time then remove the most of it, only leave a bit of it on the wire for you need it when soldering the new wires. If the wires still don't look good, add and remove more solder. Also be careful, depending on what wires the cable uses 400C might be a bit too much. Experiment, in the end you've got lots of crap cable to play with.

If you want really good long lasting cables, already built, you'll do nothing wrong by getting some replacement cables for Sennheiser IE-8. Google "ie8 replacement cable". Just cut and solder them with your cable near the drivers.

Last edited by curva; 30th November 2010 at 11:12 PM.
  Reply With Quote
Old 20th December 2010, 04:27 PM   #3
qusp is offline qusp  Australia
diyAudio Member
qusp's Avatar
Join Date: Oct 2009
Location: Brisbane, Australia
some proper sized (1/8") heatshrink wouldnt go astray either
  Reply With Quote


shure e530: splicing a non-detachable cableHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shure M95HE and Shure M97HE stylus interchange ashok Analogue Source 0 28th October 2009 05:34 AM
Wiring diagram for a Shure WA302 instrument cable? Burnedfingers Instruments and Amps 1 11th October 2007 08:52 PM
Splicing a Toslink cable lawrence99 Digital Source 15 28th March 2005 07:33 AM
Need some help with speaker cable splicing and what not AJ Bertelson Multi-Way 13 8th January 2003 04:22 PM

New To Site? Need Help?

All times are GMT. The time now is 02:43 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio