I picked up a mini zen pcb from a fellow member of the forum last month. It is based on the schematic found here:
HeadWize - Project: The Zen Headphone Amplifier by Marcello Pellerano
Why is a blocking cap needed on the input and then on the output? Wouldn't the caps on the output suffice and I could just jumper the coupling cap at the input?
HeadWize - Project: The Zen Headphone Amplifier by Marcello Pellerano
Why is a blocking cap needed on the input and then on the output? Wouldn't the caps on the output suffice and I could just jumper the coupling cap at the input?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.