sennheiser pxc 250 repair

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
hi to all.
ive got the above headphones and i need help to fix them.
if you have a set then a photo of the inside of the noisegard would do the trick as i need to rewire the headset back into it.
photo would need to be of the wiring so i can work out where each of the wires go on the board.

please can you help?

thanks ian
 
I am in the same situation.
Here are my photos.
In my case, 3 wires went off.
You can see 2 black wires and a white wire but with no success : I have no sound at all, even when I switch on, I don't ear a click. A low light red cms led is on on the pcb. I don't know if it gives any info.
Maybe by mixing info we can find what wire goes where.
Dscf6366.jpg

Dscf6370.jpg
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.