diyAudio (
-   Headphone Systems (
-   -   Rebuilding Koss "High velocity" HPs' (

Richard Ellis 23rd February 2010 03:08 AM

Rebuilding Koss "High velocity" HPs'
I have an old pair of RatShack LV-10 Headphones made by Koss.....your all probably familiar with them..the ones with the 'on the ear' foam rings.
As it happens the foam wore off & has been replaced half dozen times, now the structure is getting all busted up.
Point is the drivers are fine & I thought.....couldn't I place the drivers into a new structure as in a pair of "muffs" over the ear hearing protectors???
Any input or ideas would be welcome!

__________________________________________________ ________Rick....

eyoung 25th February 2010 12:29 AM

I have bought replacement parts directly from koss (shack phones) maybe the housings are still available. I think, have online ordering...I found them with google god knows what i was looking for when I tripped over their website.


Richard Ellis 25th February 2010 01:39 AM

Still available ?? I'll check it out thru Koss.

Thanks a bunch Elwood!

__________________________________________________ ______Rick...

MLStrand56 11th November 2012 09:27 AM

I have several pairs of Koss HV/1LC headphones, all with the same problem as yours. In the past I have purchased the Radio Shack version of my headphones (But w/o the Level Control). Then I transfer the Level Control to the new phones. Last time I checked, Radio Shack no longer sells these headphones.

I'll try Koss Tech. Support.

If they can't help, Does anybody have any idea on how to make foam ear pads?


All times are GMT. The time now is 08:27 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio