|Headphone Systems Everything to do with Headphones|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|22nd May 2009, 11:33 PM||#1|
Join Date: May 2009
NAD 302 - Headphone jack issue
So I know nothing about building or repairing electronics and was hoping someone here would have an idea about what to do with this piece.
I found an old NAD 302 in an alley about 2 weeks ago and the pre outs sound great but the speaker terminals are dead. The likely cause of this is that the headphone jack has been severed and is nowhere to be seen. The headphone jack also attaches and relays the signal to the main speaker binding posts. I bought a switched phone jack to replace it but the problem I've run into is that the original part is a PCB card with the jack attached complete with seperate terminals for each of the five wires. My switched headphone jack has only three.
My question is: Will this new headphone jack work and also which wires get soldered to which connections on the jack.
The five wires are:
Red - goes to right speaker hot
White - goes to left speaker hot
Yellow - comes off board next to "O/P L"
Brown - comes off board next to "O/P R"
Black - comes off board next to the speaker terminal neg. posts
Any help would be appreciated
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Need help with headphone jack||DJelly||Headphone Systems||3||22nd July 2009 06:39 PM|
|which is which in a headphone jack?||jarthel||Headphone Systems||7||15th April 2007 09:52 AM|
|Safety issue using (mono) jack plugs||Johnix||Parts||4||9th August 2004 10:41 AM|
|Can I add a headphone jack to BZLS||tomchaoda||Headphone Systems||8||30th September 2003 12:58 PM|
|New To Site?||Need Help?|